-
SBach 342 50E 55'' Thunderbolt Aerobatic RC Airplane A
$399.00
$259.99 -
Dynam PT-17 1300mm Wingspan RC Plane PNP Yellow
$329.00
$209.99 -
Dynam Messerschmitt ME-262 1500mm Twin 70mm EDF Jet Ready-To-Fly
$599.00
$409.97 -
Dynam C-47 Transporter V2 Brushless RC Airplane RTF 2.4G
$429.00
$319.97 -
Z51 Predator 660mm Wingspan 2.4G 2CH EPP DIY Glider RC Airplane RTF Built-in Gyro
$139.00
$89.97 -
Fi156 Storch 1.6M Pre-Built ARF Balsa Electric RC Plane
$500.00
$302.92 -
Large 1200mm Dynam P-51D Mustang Ready-To-Fly Electric RC Airplane
$399.00
$319.97 -
Dynam Seawind 1220mm (48") Wingspan Electric RC Plane PNP
$319.00
$209.97 -
Dynam Cessna 310 Grand Cruiser V2 Electric RC Airplane PNP 1280mm Wingspan With Flaps Red
$359.00
$201.92 -
Starmax F/A-18C Hornet Jolly Rogers 70mm Electric EDF RC Jet Ready-To-Fly
$399.00
$259.92
Product Description
How about this for a truly exotic and rare bird?
This is a scale model of the amazing Canadair CL-84 Dynavert STOL/VTOL aircraft developed from 1964 to '72 and extensively tested by Canadian, US Navy/Marine and RAF pilots during that period, demonstrating excellent handling characteristics in a wide range of roles including troop deployment, radar surveillance, gunship and anti-submarine warfare in addition to carrier trials aboard the USS Guam and USS Guadalcanal.
With its tilting, high lift wing, the CL-84 was at the cutting edge of technology for its time and renowned for its straightforward flight handling.
Our model represents CL-84 402 that took part in the carrier trials and later flew onto the White House lawn in Washington DC. In a highly successful flight testing program the CL-84 completed over 700 flights and was flown by 36 pilots. Despite the success of the concept no orders were forthcoming and the CL-84 project was cancelled in 1974.
The flying characteristics of the original are reproduced in the model by the pre-installed flight controller. Transition from vertical to horizontal flight and back, motor control and stabilization are managed by the flight controller so that a single switch can be used for this function. True to scale, pitch control is assisted by a horizontally mounted propeller at the tail, which is also managed by the flight controller.
A fully assembled wing-tilt mechanism makes light work of assembly, so your own CL-84 Dynavert can be in the air quickly, needing only your choice of 6 channel RC system and a 4S 2600mAh LiPoly battery to get you there.
This is a nicely finished scale model of a unique aircraft that is sure to turn heads wherever it is flown.
Specs:
Material: EPO (airframe)
Wingspan: 950mm
Length: 1050mm
Height: 340mm
Wing Motors: 2 x 900KV Outrunner
Tail Motor: 1 x 850KV Outrunner
ESC: 2 x 40A brushless, 1 x 20A brushless (for Tail Motor)
Flying weight: 1700g
Included:
1 x Canadair CL-84 Dynavert VTOL
Flight controller (installed)
Motors
Propellers
Undercarriage
All hardware
Manual
Required:
6 channel RC transmitter and receiver
4S (14.8V) 35C 2600mAh LiPoly battery
Foam safe adhesive
This is a scale model of the amazing Canadair CL-84 Dynavert STOL/VTOL aircraft developed from 1964 to '72 and extensively tested by Canadian, US Navy/Marine and RAF pilots during that period, demonstrating excellent handling characteristics in a wide range of roles including troop deployment, radar surveillance, gunship and anti-submarine warfare in addition to carrier trials aboard the USS Guam and USS Guadalcanal.
With its tilting, high lift wing, the CL-84 was at the cutting edge of technology for its time and renowned for its straightforward flight handling.
Our model represents CL-84 402 that took part in the carrier trials and later flew onto the White House lawn in Washington DC. In a highly successful flight testing program the CL-84 completed over 700 flights and was flown by 36 pilots. Despite the success of the concept no orders were forthcoming and the CL-84 project was cancelled in 1974.
The flying characteristics of the original are reproduced in the model by the pre-installed flight controller. Transition from vertical to horizontal flight and back, motor control and stabilization are managed by the flight controller so that a single switch can be used for this function. True to scale, pitch control is assisted by a horizontally mounted propeller at the tail, which is also managed by the flight controller.
A fully assembled wing-tilt mechanism makes light work of assembly, so your own CL-84 Dynavert can be in the air quickly, needing only your choice of 6 channel RC system and a 4S 2600mAh LiPoly battery to get you there.
This is a nicely finished scale model of a unique aircraft that is sure to turn heads wherever it is flown.
Specs:
Material: EPO (airframe)
Wingspan: 950mm
Length: 1050mm
Height: 340mm
Wing Motors: 2 x 900KV Outrunner
Tail Motor: 1 x 850KV Outrunner
ESC: 2 x 40A brushless, 1 x 20A brushless (for Tail Motor)
Flying weight: 1700g
Included:
1 x Canadair CL-84 Dynavert VTOL
Flight controller (installed)
Motors
Propellers
Undercarriage
All hardware
Manual
Required:
6 channel RC transmitter and receiver
4S (14.8V) 35C 2600mAh LiPoly battery
Foam safe adhesive