-
Dynam Scout 980mm Electric RC Plane Ready-To-Fly
$339.00
$269.97 -
Dynam Spitfire 1200mm V3 RC Plane Warbird with Flaps Ready-To-Fly
$429.00
$299.97 -
Dynam F6F Hellcat V2 50'' 1270mm Electric RC Airplane PNP With Flaps and Retracts
$359.00
$235.97 -
AF-Models Viper 64mm EDF RC Jet PNP Blue
$305.00
$172.97 -
LX F4 Phantom Twin 70mm EDF RC Jet Grey With Retracts Kit Version
$390.00
$166.99 -
P-40 1100mm Wingspan RC Plane PNP
$359.00
$238.99 -
VolanterRC FPVraptor V2 Tower UAV Trim Scheme 2M Unibody Pusher (757-V2) Eelctric RC Glider Kit Version
$159.00
$109.97 -
Dynam Cessna 188 Crop Duster 59''/1500mm PNP Electric RC Plane Orange
$319.00
$177.99 -
Dynam Albatross RC Bi-Plane 1270mm Electric RC Plane Ready-To-Fly
$429.00
$319.99 -
Mini Cessna 200mm/8'' Indoor Electric RC Airplane Ready-To-Fly
$39.00
$15.95
Product Description
How about this for a truly exotic and rare bird?
This is a scale model of the amazing Canadair CL-84 Dynavert STOL/VTOL aircraft developed from 1964 to '72 and extensively tested by Canadian, US Navy/Marine and RAF pilots during that period, demonstrating excellent handling characteristics in a wide range of roles including troop deployment, radar surveillance, gunship and anti-submarine warfare in addition to carrier trials aboard the USS Guam and USS Guadalcanal.
With its tilting, high lift wing, the CL-84 was at the cutting edge of technology for its time and renowned for its straightforward flight handling.
Our model represents CL-84 402 that took part in the carrier trials and later flew onto the White House lawn in Washington DC. In a highly successful flight testing program the CL-84 completed over 700 flights and was flown by 36 pilots. Despite the success of the concept no orders were forthcoming and the CL-84 project was cancelled in 1974.
The flying characteristics of the original are reproduced in the model by the pre-installed flight controller. Transition from vertical to horizontal flight and back, motor control and stabilization are managed by the flight controller so that a single switch can be used for this function. True to scale, pitch control is assisted by a horizontally mounted propeller at the tail, which is also managed by the flight controller.
A fully assembled wing-tilt mechanism makes light work of assembly, so your own CL-84 Dynavert can be in the air quickly, needing only your choice of 6 channel RC system and a 4S 2600mAh LiPoly battery to get you there.
This is a nicely finished scale model of a unique aircraft that is sure to turn heads wherever it is flown.
Specs:
Material: EPO (airframe)
Wingspan: 950mm
Length: 1050mm
Height: 340mm
Wing Motors: 2 x 900KV Outrunner
Tail Motor: 1 x 850KV Outrunner
ESC: 2 x 40A brushless, 1 x 20A brushless (for Tail Motor)
Flying weight: 1700g
Included:
1 x Canadair CL-84 Dynavert VTOL
Flight controller (installed)
Motors
Propellers
Undercarriage
All hardware
Manual
Required:
6 channel RC transmitter and receiver
4S (14.8V) 35C 2600mAh LiPoly battery
Foam safe adhesive
![](http://www.generalhobby.com/images/allmodels3/cl-84-1-800.jpg)
![](http://www.generalhobby.com/images/allmodels3/cl-84-2-800.jpg)
![](http://www.generalhobby.com/images/allmodels3/cl-84-3-800.jpg)
![](http://www.generalhobby.com/images/allmodels3/cl-84-6-800.jpg)
![](http://www.generalhobby.com/images/allmodels3/cl-84-7-800.jpg)
This is a scale model of the amazing Canadair CL-84 Dynavert STOL/VTOL aircraft developed from 1964 to '72 and extensively tested by Canadian, US Navy/Marine and RAF pilots during that period, demonstrating excellent handling characteristics in a wide range of roles including troop deployment, radar surveillance, gunship and anti-submarine warfare in addition to carrier trials aboard the USS Guam and USS Guadalcanal.
With its tilting, high lift wing, the CL-84 was at the cutting edge of technology for its time and renowned for its straightforward flight handling.
Our model represents CL-84 402 that took part in the carrier trials and later flew onto the White House lawn in Washington DC. In a highly successful flight testing program the CL-84 completed over 700 flights and was flown by 36 pilots. Despite the success of the concept no orders were forthcoming and the CL-84 project was cancelled in 1974.
The flying characteristics of the original are reproduced in the model by the pre-installed flight controller. Transition from vertical to horizontal flight and back, motor control and stabilization are managed by the flight controller so that a single switch can be used for this function. True to scale, pitch control is assisted by a horizontally mounted propeller at the tail, which is also managed by the flight controller.
A fully assembled wing-tilt mechanism makes light work of assembly, so your own CL-84 Dynavert can be in the air quickly, needing only your choice of 6 channel RC system and a 4S 2600mAh LiPoly battery to get you there.
This is a nicely finished scale model of a unique aircraft that is sure to turn heads wherever it is flown.
Specs:
Material: EPO (airframe)
Wingspan: 950mm
Length: 1050mm
Height: 340mm
Wing Motors: 2 x 900KV Outrunner
Tail Motor: 1 x 850KV Outrunner
ESC: 2 x 40A brushless, 1 x 20A brushless (for Tail Motor)
Flying weight: 1700g
Included:
1 x Canadair CL-84 Dynavert VTOL
Flight controller (installed)
Motors
Propellers
Undercarriage
All hardware
Manual
Required:
6 channel RC transmitter and receiver
4S (14.8V) 35C 2600mAh LiPoly battery
Foam safe adhesive
![](http://www.generalhobby.com/images/allmodels3/cl-84-1-800.jpg)
![](http://www.generalhobby.com/images/allmodels3/cl-84-2-800.jpg)
![](http://www.generalhobby.com/images/allmodels3/cl-84-3-800.jpg)
![](http://www.generalhobby.com/images/allmodels3/cl-84-6-800.jpg)
![](http://www.generalhobby.com/images/allmodels3/cl-84-7-800.jpg)