-
P-40 1100mm Wingspan RC Plane PNP
$359.00
$209.92 -
F-86 64mm 12 Blade EDF RC Jet PNP With Vector Stabilizer
$299.00
$169.92 -
Dynam P-61 Black Widow 1.5m Twin Engine Electric RC Plane PNP
$489.00
$255.97 -
Dynam Cessna 182 50'' Electric RC Plane Ready-To-Fly
$399.00
$319.97 -
LX F4F Wildcat 47''/1200mm EPO Electric RC Airplane Kit Version
$359.00
$184.97 -
F-22 Raptor Twin 40mm EDF Jet PNP 4S RC Jet Plane
$268.00
$175.99 -
Super Dimona Power Glider EPO 2400mm/95'' PNP
$359.00
$218.97 -
Pitts 1500mm Wingspan Balsawood Pre-Built ARF 3D Aerobatic RC Plane (XCG03)
$999.00
$499.92 -
F3A 950mm Wingspan EPO RC Plane PNP
$199.00
$119.97 -
Dynam BF-109 50'' V2 EPO Electric RC Airplane PNP With Motor/ESC/Servos/Prop/Retracts Installed
$329.00
$201.99
Product Description
This is a fast and fearsome
MiG-29 EDF ready to fly jet right out of the box. You don’t need to
purchase any other parts to get this jet to fly. It is powered by 2
powerful brushless EDFs. The MiG-29 can reach up to some outrageous
speed of 75+ mph because it is super light weight construction and
its detailed design is sure to make heads turn.
The jet is easy to assemble and a breeze to fly. Good for any skill of flyers from novice to professional level flyers. The front landing gear could turn around making landing and directional movement on land simple. The MiG-29 EDF jet is made for speed and performance.
The MiG-29's wings are swept-back and tapered with square tips. The Leading- Edge Root Extensions (LERXs) are wide and curved down to the front. LERX begins on the nose below the mid-mount point, and the wings’ trailing edges end at a high-mounted point. Twin jet Brushless Motors are mounted low and to the sides of the fuselage. The fuselage is made of a long, thin, slender body with long, pointed drooping nose. There is a high-mounted bubble canopy. The tail fins have sharply tapered leading edges, canted outward with angular, cutoff tips. Flats are high-mounted on the fuselage, movable, swept-back, and tapered with a negative slant.
Specifications:
The jet is easy to assemble and a breeze to fly. Good for any skill of flyers from novice to professional level flyers. The front landing gear could turn around making landing and directional movement on land simple. The MiG-29 EDF jet is made for speed and performance.
The MiG-29's wings are swept-back and tapered with square tips. The Leading- Edge Root Extensions (LERXs) are wide and curved down to the front. LERX begins on the nose below the mid-mount point, and the wings’ trailing edges end at a high-mounted point. Twin jet Brushless Motors are mounted low and to the sides of the fuselage. The fuselage is made of a long, thin, slender body with long, pointed drooping nose. There is a high-mounted bubble canopy. The tail fins have sharply tapered leading edges, canted outward with angular, cutoff tips. Flats are high-mounted on the fuselage, movable, swept-back, and tapered with a negative slant.
Specifications:
- Wingspan: 707mm (27.83 in)
- Length: 1013mm (39.88 in)
- Flying Weight: 790g (27.86oz)
- Wing Area: 18dm2 (300sq in)
- Wing Load: 43.89g/dm^2 (1.56oz sp. ft)
- 55mm Ducted Fan x2 (included)
- Servos: Three 9G Servos (included)
- Motor: Brushless Motorx2 (included)
- Speed Controller : 20A x2 (included)
- Power System: 11.1V 2200mAH LiPo Battery (not included)
- Radio System: 4-Channel (not included)
- Pre-painted foam main fuselage with pre-installed servos (elevator (2) and aileron), brushless motor and fan, receiver compartment and hatch and ESC
- Pre-painted foam fuselage front half. Steering servo, battery compartment and hatch and landing gear (including two front wheels) factory installed.
- Pre-painted foam wings, stabs and fins. Wings and stabs factory hinged
- Pre-bent main landing gear with wheels factory installed
- Pre-painted canopy
- Glue
- Instruction manual
- Foam ordinance
- Miscellaneous building supplies