-
PA-18 Super Cub 1700mm RC Plane PNP
$399.00
$289.92 -
Cessna 182 965mm Wingspan RC Plane PNP
$199.00
$98.95 -
Dynam 1200mm Spitfire Warbird 100% Ready-To-Fly Electric RC Airplane
$429.00
$319.97 -
F4U Corsair Blue 750mm/30.00in EPO Electric RC Airplane PNP
$189.00
$108.97 -
Sopwith Camel 1.2m RC Airplane Pre-Built Balsa ARF
$390.00
$249.97 -
Turbo Bushmaster STOL 72"(1830mm) Wingspan 6CH with Flaps and LED Lights (Night Flyer) PNP
$699.00
$406.92 -
BAE Hawk 90mm EDF Electric RC Jet Kit Version
$350.00
$187.92 -
Savage Bobber 1000mm (39.4in) Wingspan Balsawood 3D Pre-Built ARF Plane
$280.00
$161.98 -
Fi156 Storch 1.6M Pre-Built ARF Balsa Electric RC Plane
$500.00
$302.92 -
XK X450 VTOL 2.4G 6CH EPO 450mm Wingspan 3D/6G Mode Aerobatics RC Airplane Ready-To-Fly Out of Box
$199.00
$118.99
Product Description
This is a fast and fearsome
MiG-29 EDF ready to fly jet right out of the box. You don’t need to
purchase any other parts to get this jet to fly. It is powered by 2
powerful brushless EDFs. The MiG-29 can reach up to some outrageous
speed of 75+ mph because it is super light weight construction and
its detailed design is sure to make heads turn.
The jet is easy to assemble and a breeze to fly. Good for any skill of flyers from novice to professional level flyers. The front landing gear could turn around making landing and directional movement on land simple. The MiG-29 EDF jet is made for speed and performance.
The MiG-29's wings are swept-back and tapered with square tips. The Leading- Edge Root Extensions (LERXs) are wide and curved down to the front. LERX begins on the nose below the mid-mount point, and the wings’ trailing edges end at a high-mounted point. Twin jet Brushless Motors are mounted low and to the sides of the fuselage. The fuselage is made of a long, thin, slender body with long, pointed drooping nose. There is a high-mounted bubble canopy. The tail fins have sharply tapered leading edges, canted outward with angular, cutoff tips. Flats are high-mounted on the fuselage, movable, swept-back, and tapered with a negative slant.
Specifications:
The jet is easy to assemble and a breeze to fly. Good for any skill of flyers from novice to professional level flyers. The front landing gear could turn around making landing and directional movement on land simple. The MiG-29 EDF jet is made for speed and performance.
The MiG-29's wings are swept-back and tapered with square tips. The Leading- Edge Root Extensions (LERXs) are wide and curved down to the front. LERX begins on the nose below the mid-mount point, and the wings’ trailing edges end at a high-mounted point. Twin jet Brushless Motors are mounted low and to the sides of the fuselage. The fuselage is made of a long, thin, slender body with long, pointed drooping nose. There is a high-mounted bubble canopy. The tail fins have sharply tapered leading edges, canted outward with angular, cutoff tips. Flats are high-mounted on the fuselage, movable, swept-back, and tapered with a negative slant.
Specifications:
- Wingspan: 707mm (27.83 in)
- Length: 1013mm (39.88 in)
- Flying Weight: 790g (27.86oz)
- Wing Area: 18dm2 (300sq in)
- Wing Load: 43.89g/dm^2 (1.56oz sp. ft)
- 55mm Ducted Fan x2 (included)
- Servos: Three 9G Servos (included)
- Motor: Brushless Motorx2 (included)
- Speed Controller : 20A x2 (included)
- Power System: 11.1V 2200mAH LiPo Battery (not included)
- Radio System: 4-Channel (not included)
- Pre-painted foam main fuselage with pre-installed servos (elevator (2) and aileron), brushless motor and fan, receiver compartment and hatch and ESC
- Pre-painted foam fuselage front half. Steering servo, battery compartment and hatch and landing gear (including two front wheels) factory installed.
- Pre-painted foam wings, stabs and fins. Wings and stabs factory hinged
- Pre-bent main landing gear with wheels factory installed
- Pre-painted canopy
- Glue
- Instruction manual
- Foam ordinance
- Miscellaneous building supplies