-
Cessna 182 1400mm EPO Electric RC Plane Ready-To-Fly
$399.00
$229.97 -
Fokker E.III Eindecker WW1 Fighter Balsa wood ARF 1580mm Wingspan RC Plane
$526.00
$322.99 -
LX F4 Phantom Twin 70mm PNP EDF RC Jet Grey With Retracts
$499.00
$389.97 -
TopRC A1 White 800mm/32'' EPO Electric RC Airplane PNP
$199.00
$98.99 -
PBY Catalina 2.4G Brushless/LIPO Electric RC Airplane Ready-To-Fly
$399.00
$319.97 -
TopRC Hawker Hurricane 750mm/30'' EPO Electric RC Airplane PNP Camo
$189.00
$87.99 -
DW Hobby 61" Fokker DR1 Triplane Laser Cut Balsawood RC Airplane Model Kit
$506.00
$259.97 -
VolantexRC Vector 40(cm) High speed racing boat ABS Unibody (797-1) Ready-To-Run Brushed Version
$139.00
$55.97 -
Dynam Messerschmitt BF-110 59''/1500mm EPO Electric RC Plane V3 PNP
$499.00
$359.97 -
Dynam A-10 Thunderbolt II V2 Twin 64mm EDF RC Jet with Retracts 1080mm Wingspan Ready-To-Fly
$429.00
$319.97
Product Description
Feature:
New version with Twin 70mm metal EDF
New version with upgraded 80A Hobbywing brushless ESC
8 operable channels (aileron, elevator, throttle, rudder, retract, airbrake flaps, mechanical canopy opening, cockpit ejection)
Thrust to weight ratio for optimal flight performance
Mechanical canopy opening
Cockpit ejection
Airbrake flaps
Strong threaded rotary shaft driven retract system (no more stripping servos)
Pilots using their own radio systems will need to adjust Travel Adjust and or EPA (End Point Adjustment) settings before operating
Note: Minimum 9 channel receiver required for battery elimination circuit (BEC)
Specification:
Wingspan: 1524mm (60 inches)
Length: 1400mm (55.1 inches)
Flying Weight: 2480g (87.48 oz)
Thrust: More than 2800g (99 ounces of thrust)
Drive System: Two 2100KV outrunner brushless motors
EDF Diameter: Two 70mm metal EDF
Servo: Ten 17g
Retract System: Threaded rotary shaft driven
Canopy Opening: Threaded rotary shaft driven
ESC: Two 80A Hobbywing brushless ESC w/ 5A BEC
Radio: 6 channel transmitter and receiver or above (not included)
battery: 6S 4000mAh Li-Po battery (not included)
Kit version of this jet is also available. Please click here.
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-1a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-2a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-3a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-5a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-6a.jpg)
New version with Twin 70mm metal EDF
New version with upgraded 80A Hobbywing brushless ESC
8 operable channels (aileron, elevator, throttle, rudder, retract, airbrake flaps, mechanical canopy opening, cockpit ejection)
Thrust to weight ratio for optimal flight performance
Mechanical canopy opening
Cockpit ejection
Airbrake flaps
Strong threaded rotary shaft driven retract system (no more stripping servos)
Pilots using their own radio systems will need to adjust Travel Adjust and or EPA (End Point Adjustment) settings before operating
Note: Minimum 9 channel receiver required for battery elimination circuit (BEC)
Specification:
Wingspan: 1524mm (60 inches)
Length: 1400mm (55.1 inches)
Flying Weight: 2480g (87.48 oz)
Thrust: More than 2800g (99 ounces of thrust)
Drive System: Two 2100KV outrunner brushless motors
EDF Diameter: Two 70mm metal EDF
Servo: Ten 17g
Retract System: Threaded rotary shaft driven
Canopy Opening: Threaded rotary shaft driven
ESC: Two 80A Hobbywing brushless ESC w/ 5A BEC
Radio: 6 channel transmitter and receiver or above (not included)
battery: 6S 4000mAh Li-Po battery (not included)
Kit version of this jet is also available. Please click here.
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-1a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-2a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-3a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-5a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-6a.jpg)