-
Viper 64mm EDF RC Jet PNP Etihad
$305.00
$199.99 -
Extra 330 1420mm Wingspan 3D Aerobatic RC Plane PNP Built with Strong EPO Materials
$482.00
$299.99 -
VolanterRC FPVraptor V2 Tower UAV Trim Scheme 2M Unibody Pusher (757-V2) Eelctric RC Glider Kit Version
$159.00
$109.97 -
Dynam Hawker Tempest 1250mm Electric RC Plane Ready-To-Fly
$429.00
$316.97 -
Unique Models Extra 300 1200mm Wingspan 3D RC Plane PNP Y
$399.00
$229.99 -
Fox 3M/118'' RC Glider Electric Motor Version
$629.00
$399.97 -
Large 1200mm Dynam P-51D Mustang Ready-To-Fly Electric RC Airplane
$399.00
$319.97 -
Focke-Wulf Ta-152H 1.3M PNP RC Plane
$399.00
$219.92 -
Extra 330 1000mm Wingspan Balsawood 3D Aerobatic Pre-Built ARF RC Plane
$350.00
$159.99 -
Dynam Seawind 1220mm (48") Wingspan Electric RC Plane PNP
$319.00
$219.97
Product Description
Feature:
New version with Twin 70mm metal EDF
New version with upgraded 80A Hobbywing brushless ESC
8 operable channels (aileron, elevator, throttle, rudder, retract, airbrake flaps, mechanical canopy opening, cockpit ejection)
Thrust to weight ratio for optimal flight performance
Mechanical canopy opening
Cockpit ejection
Airbrake flaps
Strong threaded rotary shaft driven retract system (no more stripping servos)
Pilots using their own radio systems will need to adjust Travel Adjust and or EPA (End Point Adjustment) settings before operating
Note: Minimum 9 channel receiver required for battery elimination circuit (BEC)
Specification:
Wingspan: 1524mm (60 inches)
Length: 1400mm (55.1 inches)
Flying Weight: 2480g (87.48 oz)
Thrust: More than 2800g (99 ounces of thrust)
Drive System: Two 2100KV outrunner brushless motors
EDF Diameter: Two 70mm metal EDF
Servo: Ten 17g
Retract System: Threaded rotary shaft driven
Canopy Opening: Threaded rotary shaft driven
ESC: Two 80A Hobbywing brushless ESC w/ 5A BEC
Radio: 6 channel transmitter and receiver or above (not included)
battery: 6S 4000mAh Li-Po battery (not included)
Kit version of this jet is also available. Please click here.
New version with Twin 70mm metal EDF
New version with upgraded 80A Hobbywing brushless ESC
8 operable channels (aileron, elevator, throttle, rudder, retract, airbrake flaps, mechanical canopy opening, cockpit ejection)
Thrust to weight ratio for optimal flight performance
Mechanical canopy opening
Cockpit ejection
Airbrake flaps
Strong threaded rotary shaft driven retract system (no more stripping servos)
Pilots using their own radio systems will need to adjust Travel Adjust and or EPA (End Point Adjustment) settings before operating
Note: Minimum 9 channel receiver required for battery elimination circuit (BEC)
Specification:
Wingspan: 1524mm (60 inches)
Length: 1400mm (55.1 inches)
Flying Weight: 2480g (87.48 oz)
Thrust: More than 2800g (99 ounces of thrust)
Drive System: Two 2100KV outrunner brushless motors
EDF Diameter: Two 70mm metal EDF
Servo: Ten 17g
Retract System: Threaded rotary shaft driven
Canopy Opening: Threaded rotary shaft driven
ESC: Two 80A Hobbywing brushless ESC w/ 5A BEC
Radio: 6 channel transmitter and receiver or above (not included)
battery: 6S 4000mAh Li-Po battery (not included)
Kit version of this jet is also available. Please click here.