-
Super Dimona Power Glider EPO 2400mm/95'' PNP
$359.00
$218.97 -
AF-Models Viper 64mm EDF RC Jet PNP Red
$305.00
$199.99 -
F8F-1 Bearcat 1200mm (47.2in) Wingspan 4S PNP WW2 Warbird RC Plane
$359.00
$229.99 -
LX F4 Phantom Twin 70mm PNP EDF RC Jet Grey With Retracts
$499.00
$369.97 -
Volantex P-51 Mustang 30''/750MM (768-1) 750MM Ready-To-Fly RC Airplane
$299.00
$189.99 -
AF Model Aggressor FPV 1200mm Wingspan RC Plane PNP
$305.00
$189.99 -
Skyline SBach 342 70 60'' Aerobatic RC Airplane Thunderbolt A Carbon Version
$399.00
$292.93 -
Z51 Predator 660mm Wingspan 2.4G 2CH EPP DIY Glider RC Airplane RTF Built-in Gyro
$139.00
$89.97 -
GlaStar 1.2M RC Plane PNP
$229.00
$189.99 -
DG-808S 4m/157'' RC Glider Electric Motor Version
$699.00
$423.97
Product Description
Feature:
New version with Twin 70mm metal EDF
New version with upgraded 80A Hobbywing brushless ESC
8 operable channels (aileron, elevator, throttle, rudder, retract, airbrake flaps, mechanical canopy opening, cockpit ejection)
Thrust to weight ratio for optimal flight performance
Mechanical canopy opening
Cockpit ejection
Airbrake flaps
Strong threaded rotary shaft driven retract system (no more stripping servos)
Pilots using their own radio systems will need to adjust Travel Adjust and or EPA (End Point Adjustment) settings before operating
Note: Minimum 9 channel receiver required for battery elimination circuit (BEC)
Specification:
Wingspan: 1524mm (60 inches)
Length: 1400mm (55.1 inches)
Flying Weight: 2480g (87.48 oz)
Thrust: More than 2800g (99 ounces of thrust)
Drive System: Two 2100KV outrunner brushless motors
EDF Diameter: Two 70mm metal EDF
Servo: Ten 17g
Retract System: Threaded rotary shaft driven
Canopy Opening: Threaded rotary shaft driven
ESC: Two 80A Hobbywing brushless ESC w/ 5A BEC
Radio: 6 channel transmitter and receiver or above (not included)
battery: 6S 4000mAh Li-Po battery (not included)
Kit version of this jet is also available. Please click here.
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-1a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-2a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-3a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-5a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-6a.jpg)
New version with Twin 70mm metal EDF
New version with upgraded 80A Hobbywing brushless ESC
8 operable channels (aileron, elevator, throttle, rudder, retract, airbrake flaps, mechanical canopy opening, cockpit ejection)
Thrust to weight ratio for optimal flight performance
Mechanical canopy opening
Cockpit ejection
Airbrake flaps
Strong threaded rotary shaft driven retract system (no more stripping servos)
Pilots using their own radio systems will need to adjust Travel Adjust and or EPA (End Point Adjustment) settings before operating
Note: Minimum 9 channel receiver required for battery elimination circuit (BEC)
Specification:
Wingspan: 1524mm (60 inches)
Length: 1400mm (55.1 inches)
Flying Weight: 2480g (87.48 oz)
Thrust: More than 2800g (99 ounces of thrust)
Drive System: Two 2100KV outrunner brushless motors
EDF Diameter: Two 70mm metal EDF
Servo: Ten 17g
Retract System: Threaded rotary shaft driven
Canopy Opening: Threaded rotary shaft driven
ESC: Two 80A Hobbywing brushless ESC w/ 5A BEC
Radio: 6 channel transmitter and receiver or above (not included)
battery: 6S 4000mAh Li-Po battery (not included)
Kit version of this jet is also available. Please click here.
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-1a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-2a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-3a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-5a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-6a.jpg)