-
Dynam Tiger Moth 1270mm EPO Electric RC Plane PNP
$309.00
$202.99 -
ASW-15 4m/157'' Electric RC Gilder with Brake FF-B051
$799.00
$459.97 -
Twin Otter DHC-6 1800mm/70.9'' with Floats RC Plane PNP
$720.00
$432.92 -
Extra-260 1500mm(60") Wingspan Balsawood 3D ARF Plane (XCG02)
$559.00
$339.92 -
AF Model Aggressor FPV 1200mm Wingspan RC Plane PNP
$305.00
$161.98 -
Dynam 1200mm Spitfire Warbird 100% Ready-To-Fly Electric RC Airplane
$429.00
$319.97 -
Condor Magic EVO4 3M/118'' Electric RC Glider
$560.00
$389.97 -
TopRC Hawker Hurricane 750mm/30'' EPO Electric RC Airplane PNP Camo
$189.00
$87.99 -
TopRC A1 White 800mm/32'' EPO Electric RC Airplane PNP
$199.00
$98.99 -
Extra 330 1420mm Wingspan 3D Aerobatic RC Plane PNP Built with Strong EPO Materials
$482.00
$299.92
Product Description
Feature:
New version with Twin 70mm metal EDF
New version with upgraded 80A Hobbywing brushless ESC
8 operable channels (aileron, elevator, throttle, rudder, retract, airbrake flaps, mechanical canopy opening, cockpit ejection)
Thrust to weight ratio for optimal flight performance
Mechanical canopy opening
Cockpit ejection
Airbrake flaps
Strong threaded rotary shaft driven retract system (no more stripping servos)
Pilots using their own radio systems will need to adjust Travel Adjust and or EPA (End Point Adjustment) settings before operating
Note: Minimum 9 channel receiver required for battery elimination circuit (BEC)
Specification:
Wingspan: 1524mm (60 inches)
Length: 1400mm (55.1 inches)
Flying Weight: 2480g (87.48 oz)
Thrust: More than 2800g (99 ounces of thrust)
Drive System: Two 2100KV outrunner brushless motors
EDF Diameter: Two 70mm metal EDF
Servo: Ten 17g
Retract System: Threaded rotary shaft driven
Canopy Opening: Threaded rotary shaft driven
ESC: Two 80A Hobbywing brushless ESC w/ 5A BEC
Radio: 6 channel transmitter and receiver or above (not included)
battery: 6S 4000mAh Li-Po battery (not included)
Kit version of this jet is also available. Please click here.
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-1a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-2a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-3a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-5a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-6a.jpg)
New version with Twin 70mm metal EDF
New version with upgraded 80A Hobbywing brushless ESC
8 operable channels (aileron, elevator, throttle, rudder, retract, airbrake flaps, mechanical canopy opening, cockpit ejection)
Thrust to weight ratio for optimal flight performance
Mechanical canopy opening
Cockpit ejection
Airbrake flaps
Strong threaded rotary shaft driven retract system (no more stripping servos)
Pilots using their own radio systems will need to adjust Travel Adjust and or EPA (End Point Adjustment) settings before operating
Note: Minimum 9 channel receiver required for battery elimination circuit (BEC)
Specification:
Wingspan: 1524mm (60 inches)
Length: 1400mm (55.1 inches)
Flying Weight: 2480g (87.48 oz)
Thrust: More than 2800g (99 ounces of thrust)
Drive System: Two 2100KV outrunner brushless motors
EDF Diameter: Two 70mm metal EDF
Servo: Ten 17g
Retract System: Threaded rotary shaft driven
Canopy Opening: Threaded rotary shaft driven
ESC: Two 80A Hobbywing brushless ESC w/ 5A BEC
Radio: 6 channel transmitter and receiver or above (not included)
battery: 6S 4000mAh Li-Po battery (not included)
Kit version of this jet is also available. Please click here.
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-1a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-2a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-3a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-5a.jpg)
![](http://www.generalhobby.com/images/allmodels3/lx-a-10-6a.jpg)