-
Dynam Cessna 310 Grand Cruiser V2 Electric RC Airplane PNP 1280mm Wingspan With Flaps Blue
$359.00
$228.97 -
Dynam Cessna 188 Crop Duster 59''/1500mm PNP Electric RC Plane Orange
$319.00
$178.99 -
F-18 Hornet EDF RC Jet RTF 2.4ghz
$369.97
$259.97 -
TopRC F-18 Blue Angel 686mm Wingspan RC Jet PNP
$259.00
$139.97 -
Volantex P-51D Mustang 400mm Wingspan 2.4G 6-Axis Gyro RC Airplane One Key Return Ready-To-Fly
$150.00
$68.99 -
Dynam BF-109 50'' V2 EPO Electric RC Airplane PNP With Motor/ESC/Servos/Prop/Retracts Installed
$329.00
$229.99 -
Dynam Hawker Tempest 1250mm Electric RC Plane PNP
$319.00
$193.99 -
Dynam A-10 Thunderbolt II V2 Twin 64mm EDF RC Jet with Retracts 1080mm Wingspan Ready-To-Fly
$429.00
$319.97 -
LX F4F Wildcat 47''/1200mm EPO Electric RC Airplane Yellow Ready-To-Fly
$659.00
$389.97 -
Dynam Hawker Tempest 1250mm Electric RC Plane Ready-To-Fly
$429.00
$316.97
Product Description
Specifications:
Wingspan: 44''/1120mm
Wing Area: 290 sq. in.
Ready-to-fly weight: 20 -23 oz .
Length: 30''/760m
Power: OX22-13 Outrunner or IX20XL In-runner brushless
Features:
Construction: Precision laser-cut balsa & plywood construction.
Wings: Wing & stabilizer are built-up one piece designs.
Wing Spars: Traditional hardwood spars.
Incidence: Factory pre-set.
Control Surfaces: Conventional sport size control surface area.
Covering: Factory applied Oracover covering. Vinyl graphics also included.
Cowl: Precision color matched pre-painted ABS plastic.
Wheel Pants: Precision color matched pre-painted ABS plastic.
Canopy / Hatch: Pre-formed & pre-painted ABS plastic
Landing Gear: Two piece pre-formed wire gear, installs in the wing.
Servos: One per Aileron / One for Elevator / One for Rudder. (4 servos total)
Hinge Slots: Factory Pre-slotted.
Building Time: 4-6 hours.
Wingspan: 44''/1120mm
Wing Area: 290 sq. in.
Ready-to-fly weight: 20 -23 oz .
Length: 30''/760m
Power: OX22-13 Outrunner or IX20XL In-runner brushless
Features:
Construction: Precision laser-cut balsa & plywood construction.
Wings: Wing & stabilizer are built-up one piece designs.
Wing Spars: Traditional hardwood spars.
Incidence: Factory pre-set.
Control Surfaces: Conventional sport size control surface area.
Covering: Factory applied Oracover covering. Vinyl graphics also included.
Cowl: Precision color matched pre-painted ABS plastic.
Wheel Pants: Precision color matched pre-painted ABS plastic.
Canopy / Hatch: Pre-formed & pre-painted ABS plastic
Landing Gear: Two piece pre-formed wire gear, installs in the wing.
Servos: One per Aileron / One for Elevator / One for Rudder. (4 servos total)
Hinge Slots: Factory Pre-slotted.
Building Time: 4-6 hours.