-
Volantex Ranger 2400 5 Channel FPV Airplane With 2.4 Meter Wingspan And Multiple Camera Mounting Platform (757-9) PNP
$369.00
$188.97 -
Dynam Primo 1450mm Wingspan RC Airplane Ready-To-Fly
$399.00
$299.97 -
AT-6 Texan 5-CH 2.4Ghz 1370mm Electric R/C RC Airplane Plane Ready To Fly
$399.92
$299.97 -
AF-Models P-40 1100mm Wingspan RC Plane PNP
$359.00
$238.99 -
Dynam A-10 Thunderbolt II V2 Twin 64mm EDF RC Jet with Retracts 1080mm Wingspan Ready-To-Fly
$429.00
$319.97 -
Dynam Seawind 1220mm (48") Wingspan Electric RC Plane Ready-To-Fly
$399.00
$319.97 -
Starmax F-22 Raptor 70mm EDF Jet Electric R/C RC Airplane Plane Ready-To-Fly
$389.92
$259.97 -
Dynam BF-109 50'' V2 EPO Electric RC Airplane PNP With Motor/ESC/Servos/Prop/Retracts Installed
$329.00
$229.99 -
PBY Catalina 2.4G Brushless/LIPO Electric RC Airplane Ready-To-Fly
$399.00
$319.97 -
Dynam Focke Wulf FW-190 1270mm V3 RC Plane with Retracts and Flaps PNP
$329.00
$201.99
Product Description
Specifications:
Wingspan: 44''/1120mm
Wing Area: 290 sq. in.
Ready-to-fly weight: 20 -23 oz .
Length: 30''/760m
Power: OX22-13 Outrunner or IX20XL In-runner brushless
Features:
Construction: Precision laser-cut balsa & plywood construction.
Wings: Wing & stabilizer are built-up one piece designs.
Wing Spars: Traditional hardwood spars.
Incidence: Factory pre-set.
Control Surfaces: Conventional sport size control surface area.
Covering: Factory applied Oracover covering. Vinyl graphics also included.
Cowl: Precision color matched pre-painted ABS plastic.
Wheel Pants: Precision color matched pre-painted ABS plastic.
Canopy / Hatch: Pre-formed & pre-painted ABS plastic
Landing Gear: Two piece pre-formed wire gear, installs in the wing.
Servos: One per Aileron / One for Elevator / One for Rudder. (4 servos total)
Hinge Slots: Factory Pre-slotted.
Building Time: 4-6 hours.
Wingspan: 44''/1120mm
Wing Area: 290 sq. in.
Ready-to-fly weight: 20 -23 oz .
Length: 30''/760m
Power: OX22-13 Outrunner or IX20XL In-runner brushless
Features:
Construction: Precision laser-cut balsa & plywood construction.
Wings: Wing & stabilizer are built-up one piece designs.
Wing Spars: Traditional hardwood spars.
Incidence: Factory pre-set.
Control Surfaces: Conventional sport size control surface area.
Covering: Factory applied Oracover covering. Vinyl graphics also included.
Cowl: Precision color matched pre-painted ABS plastic.
Wheel Pants: Precision color matched pre-painted ABS plastic.
Canopy / Hatch: Pre-formed & pre-painted ABS plastic
Landing Gear: Two piece pre-formed wire gear, installs in the wing.
Servos: One per Aileron / One for Elevator / One for Rudder. (4 servos total)
Hinge Slots: Factory Pre-slotted.
Building Time: 4-6 hours.