-
Dynam Cessna 188 Crop Duster 59''/1500mm Electric RC Plane Orange Ready-To-Fly
$429.00
$299.97 -
TopRC FW-190 1200mm/47in EPO Electric RC Airplane Ready-To-Fly
$429.00
$319.97 -
Dynam Cessna 182 50'' Electric RC Plane Ready-To-Fly
$399.00
$319.97 -
Dynam Focke Wulf FW-190 1270mm V3 RC Plane with Retracts and Flaps PNP
$329.00
$201.99 -
Dynam Seawind 1220mm (48") Wingspan Electric RC Plane PNP
$319.00
$239.97 -
Dynam Cessna 310 Grand Cruiser V2 Electric RC Airplane 1280mm Wingspan With Flaps Red Ready-To-Fly
$429.00
$319.97 -
Dynam Hawk Sky V2 4CH 1370mm 53'' Wingspan RC Airplane Glider Ready-To-Fly
$398.00
$269.97 -
TopRC FW-190 1200mm/47in EPO Electric RC Airplane PNP
$329.00
$216.99 -
Dynam C-47 Transporter V2 Brushless RC Airplane PNP
$339.00
$243.97 -
Volantex Ranger 1600 V757-7 1600mm Wingspan EPO FPV Aircraft RC Airplane PNP
$269.00
$179.99
Product Description
Condition: New.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.