-
Dynam P-47D Thunderbolt Hun Hunter 48'' EPO Electric RC Airplane With Retracts Ready-To-Fly
$429.00
$319.97 -
Volantex P-51 Mustang 30'' (TW-768-1) EPO Electric RC Plane PNP Blue
$189.00
$91.99 -
DW Hobby 61" Fokker DR1 Triplane Laser Cut Balsawood RC Airplane Model Kit
$506.00
$259.97 -
Dynam Peaks Pitts Model 12 42''/1070mm Electric EPO RC Plane PNP
$319.00
$206.99 -
Dynam Cessna 188 Crop Duster 59''/1500mm Electric RC Plane Blue Ready-To-Fly
$429.00
$319.97 -
Volantex P-51D Mustang 400mm Wingspan 2.4G 6-Axis Gyro RC Airplane One Key Return Ready-To-Fly
$150.00
$68.99 -
TopRC Jet Star 800mm Wingspan RC Jet PNP Blue
$259.00
$139.97 -
Dynam BF-109 50'' V2 EPO Electric RC Airplane PNP With Motor/ESC/Servos/Prop/Retracts Installed
$329.00
$229.99 -
2.4Ghz 4-CH 64mm EDF F-15 Remote Control Jet w/ Brushless Motor/ESC/Lipo 100% RTF Grey
$369.00
$239.97 -
TopRC Cessna 182 965mm Wingspan RC Plane PNP
$199.00
$97.99
Product Description
Condition: New.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.