-
Dynam Cessna 188 Crop Duster 59''/1500mm Electric RC Plane Orange Ready-To-Fly
$429.00
$299.97 -
Dynam Cessna 310 Grand Cruiser V2 Electric RC Airplane PNP 1280mm Wingspan With Flaps Red
$359.00
$225.99 -
Dynam Spitfire 1200mm V3 RC Plane Warbird with Flaps Ready-To-Fly
$429.00
$299.97 -
F6F Hellcat 50'' 1270mm EPO Electric RC Airplane Ready-To-Fly
$399.00
$309.97 -
PBY Catalina 2.4G Brushless/LIPO Electric RC Airplane PNP Blue
$359.00 -
Unique Models Cessna 182 1410mm EPO Electric RC Plane PNP
$329.00
$169.99 -
LX F4 Phantom Twin 70mm EDF RC Jet Grey With Retracts Kit Version
$390.00
$166.99 -
2.4Ghz 4-CH 64mm EDF F-15 Remote Control Jet w/ Brushless Motor/ESC/Lipo 100% RTF Grey
$369.00
$239.97 -
XK X450 VTOL 2.4G 6CH EPO 450mm Wingspan 3D/6G Mode Aerobatics RC Airplane Ready-To-Fly Out of Box
$199.00
$118.99 -
Cessna 182 1400mm EPO Electric RC Plane Ready-To-Fly
$399.00
$229.97
Product Description
Condition: New.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.