-
LX-Model F-117 Nighthawk Stealth Fighter 64mm EDF Electric RC Jet Airplane PNP
$269.00
$251.97 -
Starmax F-22 Raptor 70mm EDF Jet Electric R/C RC Airplane Plane Ready-To-Fly
$389.92
$219.97 -
Dynam Hawker Hurricane 49''/1250mm EPO Electric RC Plane PNP
$329.00
$205.99 -
Dynam Seawind 1220mm (48") Wingspan Electric RC Plane Ready-To-Fly
$399.00
$319.97 -
Dynam PBY Catalina Brushless/LIPO Electric RC Airplane PNP Blue
$329.00
$225.99 -
Unique Models Extra 300 1200mm Wingspan 3D RC Plane PNP Y
$399.00
$239.97 -
P-51 P51 P-51D Mustang 2.4G 4CH Electric R/C RC Airplane Plane 100% Ready To Fly
$259.92 -
TopRC P-51D Mustang 750mm/30.00in EPO Electric RC Airplane PNP Blue
$189.00
$102.97 -
Dynam Cessna 310 Grand Cruiser V2 Electric RC Airplane PNP 1280mm Wingspan With Flaps Blue
$359.00
$228.97 -
Volantex RC Ranger 400 RC Airplane with 6-Axis Gyro System Ready-To-Fly 761-6
$150.00
$91.97
Product Description
Condition: New.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.