-
LX F4F Wildcat 47''/1200mm EPO Electric RC Airplane Ready-To-Fly
$659.00
$389.97 -
Dynam Sbach 342 Aerobatic RC Plane 1250mm Ready-To-Fly
$399.00
$319.97 -
Dynam Tiger Moth 1270mm EPO Electric RC Plane Ready-To-Fly
$399.00
$319.97 -
LX F4F Wildcat 47''/1200mm EPO Electric RC Airplane Yellow Ready-To-Fly
$659.00
$389.97 -
Dynam Turbo Jet Twin 64mm EDF Jet 1180mm (46") Wingspan with Electronic Retracts and Flaps Ready-To-Fly
$429.00
$299.97 -
Volantex Ranger 1600 V757-7 1600mm Wingspan EPO FPV Aircraft RC Airplane PNP
$269.00
$139.99 -
Dynam SR22 1400mm V2 RC Plane with Flaps PNP W
$359.00
$175.99 -
Volantex Ranger 2000 V757-8 2000mm Wingspan EPO FPV Aircraft RC Airplane KIT
$259.00
$109.99 -
Lanyu ASW28 2.6m/103'' Unibody Scale RC Glider (759-1) Ready-To-Fly
$399.00
$319.97 -
XK X450 VTOL 2.4G 6CH EPO 450mm Wingspan 3D/6G Mode Aerobatics RC Airplane Ready-To-Fly Out of Box
$199.00
$118.99
Product Description
Condition: New.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.