-
Dynam Spitfire 1200mm V3 RC Plane Warbird with Flaps Ready-To-Fly
$429.00
$299.97 -
Volantex RC Vector 80 (cm) High speed ABS Unibody Boats 798-1 brushless PNP
$229.00
$121.99 -
Volantex ASW28 2.6m/103'' Unibody Scale RC Glider (759-1) PNP
$289.00
$157.99 -
F/A-18E Hornet 64mm EDF Electric R/C RC Jet Airplane Plane Ready-To-Fly
$369.00
$239.97 -
Dynam DHC-2 Beaver 1500mm (59") Wingspan Electric RC Plane PNP New Version V2
$359.00
$223.97 -
VolantexRC Saber 920 3D RC Plane PNP Model No TW-756-2
$235.00
$123.97 -
Dynam BF-109 50'' V2 EPO Electric RC Airplane PNP With Motor/ESC/Servos/Prop/Retracts Installed
$329.00
$229.99 -
Dynam T-28 Trojan V2 1270mm EPO RC Plane With Retracts PNP Yellow
$319.00
$229.97 -
LX-Model F-117 Nighthawk Stealth Fighter 64mm EDF Electric RC Jet Airplane PNP
$269.00
$251.97 -
Unique Models Extra 300 1200mm Wingspan 3D RC Plane PNP R
$399.00
$237.99
Product Description
Condition: New.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.