-
LX F4 Phantom Twin 70mm EDF RC Jet Grey With Retracts Kit Version
$390.00
$167.99 -
Dynam 1200mm Spitfire Warbird 100% Ready-To-Fly Electric RC Airplane
$429.00
$319.97 -
Dynam Sbach 342 Aerobatic RC Plane 1250mm Ready-To-Fly
$399.00
$319.97 -
Dynam Seawind 1220mm (48") Wingspan Electric RC Plane Ready-To-Fly
$399.00
$319.97 -
VolantexRC Corsair F4U 4CH Warbird RC Airplane with Xpilot Stabilizer One-key Aerobatic RTF 761-8
$150.00
$80.97 -
Starmax F-22 Raptor 70mm EDF Jet Electric R/C RC Airplane Plane Ready-To-Fly
$389.92
$219.97 -
Cessna 170 G2 86'' PNP Electric Airplane
$950.00
$415.00 -
EX-Hobby Ranger600 Glider with Xpilot Stabilization System and One Key U-turn Function (761-2) Ready-To-Fly Out Of Box
$129.00
$99.97 -
Dynam Albatross RC Bi-Plane 1270mm Electric RC Plane PNP
$319.00
$249.99 -
LX-Model F-117 Nighthawk Stealth Fighter 64mm EDF Electric RC Jet Airplane PNP
$269.00
$251.97
Product Description
Condition: New.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.