-
LX F4F Wildcat 47''/1200mm EPO Electric RC Airplane PNP
$499.00
$274.99 -
VolanterRC FPVraptor V2 Tower UAV Trim Scheme 2M Unibody Pusher (757-V2) Eelctric RC Glider Kit Version
$159.00
$109.97 -
Dynam Devil 3D Sport Aerobatic Bi-Plane EPO Electric RC Plane PNP
$319.00
$258.97 -
Unique Models Extra 300 1200mm Wingspan 3D RC Plane PNP
$399.00
$238.97 -
Dynam T-28 Trojan V2 1270mm EPO RC Plane With Retracts PNP Yellow
$319.00
$229.97 -
Dynam SR22 1400mm V2 RC Plane with Flaps PNP Yellow
$359.00
$175.99 -
F6F Hellcat 50'' 1270mm EPO Electric RC Airplane Ready-To-Fly
$399.00
$309.97 -
Beechcraft Beech Duke B60 1600mm/63'' Electric RC Plane Kit
$455.00
$269.97 -
Dynam Hawker Hurricane 49''/1250mm EPO Electric RC Plane Ready-To-Fly
$429.00
$319.97 -
Dynam Cessna 182 50'' Electric RC Plane Ready-To-Fly
$399.00
$319.97
Product Description
Condition: New.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.