-
DG-808S 4m/157'' RC Glider Electric Motor Version
$699.00
$423.97 -
Dynam BF-109 50'' V2 EPO Electric RC Airplane PNP With Motor/ESC/Servos/Prop/Retracts Installed
$329.00
$229.99 -
TopRC Cessna 182 965mm Wingspan RC Plane PNP
$199.00
$97.99 -
Dynam WACO (YNF-5D) 1270mm 4ch EPO RC Electric Plane Ready-To-Fly
$399.00
$319.97 -
VolantexRC Vector 40(cm) High speed racing boat ABS Unibody (797-1) Ready-To-Run Brushed Version
$139.00
$55.97 -
TopRC FW-190 1200mm/47in EPO Electric RC Airplane Ready-To-Fly
$429.00
$319.97 -
Dynam Messerschmitt ME-262 1500mm Twin 70mm EDF Jet Ready-To-Fly
$599.00
$409.97 -
VolantexRC Saber 920 3D RC Plane PNP Model No TW-756-2
$235.00
$123.97 -
Dynam Hawker Tempest 1250mm Electric RC Plane PNP
$319.00
$190.99 -
Dynam 1200mm Spitfire Warbird 100% Ready-To-Fly Electric RC Airplane
$429.00
$319.97
Product Description
Condition: New.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.