-
LX F4F Wildcat 47''/1200mm EPO Electric RC Airplane PNP
$499.00
$273.99 -
Volantex P-51D Mustang 400mm Wingspan 2.4G 6-Axis Gyro RC Airplane One Key Return Ready-To-Fly
$150.00
$68.99 -
2.4Ghz 4-CH 64mm EDF F-15 Remote Control Jet w/ Brushless Motor/ESC/Lipo 100% RTF Grey
$369.00
$239.97 -
Dynam SR22 1400mm V2 RC Plane with Flaps PNP Yellow
$359.00
$175.99 -
VolanterRC FPVraptor V2 Tower UAV Trim Scheme 2M Unibody Pusher (757-V2) Eelctric RC Glider Kit Version
$159.00
$109.97 -
Toprc P-51D Mustang Yellow 750mm/30.00in EPO Electric RC Airplane Ready-To-Fly
$289.00
$219.99 -
Dynam F6F Hellcat V2 50'' 1270mm EPO Electric RC Airplane Ready-ToFly
$459.00
$319.97 -
Dynam AT-6 Texan 1370mm Electric RC Airplane PNP
$319.00
$204.99 -
Dynam T-28 Trojan 1270mm EPO RC Plane With Retracts Ready-To-Fly
$399.00
$319.97 -
Dynam C-47 Transporter V2 Brushless RC Airplane RTF 2.4G
$429.00
$319.97
Product Description
Condition: New.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.