-
F3A 50E A4 55'' Balsa Electric RC Plane
$520.00
$285.97 -
F-35 64mm Electric Ducted Fan Radio Control Jet Ready-To-Fly
$365.00
$199.97 -
P-51 Mustang 4 Channel Warbird Ready to Fly 2.4Ghz 800mm Wingspan
$289.00
$189.97 -
DW Hobby 61" Fokker DR1 Triplane Laser Cut Balsawood RC Airplane Model Kit
$506.00
$259.97 -
Dynam Cessna 310 Grand Cruiser V2 Electric RC Airplane 1280mm Wingspan With Flaps Red Ready-To-Fly
$429.00
$319.97 -
Dynam Turbo Jet V2 Twin 64mm EDF Jet 1180mm (46") Wingspan with Electronic Retracts and Flaps PNP
$319.00
$245.97 -
Volantex P-51 Mustang 30'' (TW-768-1) EPO Electric RC Plane PNP Blue
$189.00
$91.99 -
Volantex Ranger 2000 V757-8 2000mm Wingspan EPO FPV Aircraft RC Airplane KIT
$259.00
$109.99 -
Dynam AT-6 Texan 1370mm Electric RC Airplane PNP
$319.00
$204.99 -
Toprc P-51D Mustang Yellow 750mm/30.00in EPO Electric RC Airplane Ready-To-Fly
$289.00
$219.99
Product Description
Condition: New.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.