-
LX F4F Wildcat 47''/1200mm EPO Electric RC Airplane Yellow Ready-To-Fly
$659.00
$389.97 -
Dynam Primo 1450mm Wingspan RC Airplane Ready-To-Fly
$399.00
$299.97 -
VolantexRC Vector 40(cm) High speed racing boat ABS Unibody (797-1) Ready-To-Run Brushed Version
$139.00
$55.97 -
Starmax F/A-18C Hornet Jolly Rogers 70mm Electric EDF RC Jet Ready-To-Fly
$399.00
$239.92 -
TopRC Hawker Hurricane 750mm/30'' EPO Electric RC Airplane PNP Camo
$189.00
$87.99 -
Unique Models Extra 300 1200mm Wingspan 3D RC Plane PNP Y
$399.00
$237.99 -
Volantex P-51 Mustang 30''/750MM (768-1) 750MM Ready-To-Fly RC Airplane
$299.00
$189.99 -
Dynam Cessna 310 Grand Cruiser V2 Electric RC Airplane 1280mm Wingspan With Flaps Red Ready-To-Fly
$429.00
$319.97 -
LX F4F Wildcat 47''/1200mm EPO Electric RC Airplane Kit Version
$359.00
$184.97 -
Dynam P-47D Thunderbolt Hun Hunter 48'' EPO Electric RC Airplane With Retracts Ready-To-Fly
$429.00
$319.97
Product Description
Condition: New.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.