-
Dynam SR22 1400mm V2 RC Plane with Flaps PNP W
$359.00
$175.99 -
Dynam Seawind 1220mm (48") Wingspan Electric RC Plane PNP
$319.00
$239.97 -
P-51 P51 P-51D Mustang 2.4G 4CH Electric R/C RC Airplane Plane 100% Ready To Fly
$259.92 -
Cessna 170 G2 86'' PNP Electric Airplane
$950.00
$415.00 -
EX-Hobby Ranger600 Glider with Xpilot Stabilization System and One Key U-turn Function (761-2) Ready-To-Fly Out Of Box
$129.00
$99.97 -
Dynam Cessna 310 Grand Cruiser V2 Electric RC Airplane 1280mm Wingspan With Flaps Red Ready-To-Fly
$429.00
$319.97 -
Volantex Ranger 1600 V757-7 1600mm Wingspan EPO FPV Aircraft RC Airplane PNP
$269.00
$139.99 -
Volantex RC Ranger 400 RC Airplane with 6-Axis Gyro System Ready-To-Fly 761-6
$150.00
$91.97 -
Toprc P-51D Mustang Yellow 750mm/30.00in EPO Electric RC Airplane Ready-To-Fly
$289.00
$219.99 -
Dynam Tiger Moth 1270mm EPO Electric RC Plane Ready-To-Fly
$399.00
$319.97
Product Description
Condition: New.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.