-
VolantexRC Corsair F4U 4CH Warbird RC Airplane with Xpilot Stabilizer One-key Aerobatic RTF 761-8
$150.00
$80.97 -
TopRC P-51D Mustang 750mm/30.00in EPO Electric RC Airplane Ready-To-Fly Blue
$289.00
$199.97 -
2.4Ghz 4-CH 64mm EDF F-15 Remote Control Jet w/ Brushless Motor/ESC/Lipo 100% RTF Grey
$369.00
$239.97 -
Dynam Cessna 188 Crop Duster 59''/1500mm PNP Electric RC Plane Blue
$319.00
$176.97 -
Dynam Hawker Hurricane 49''/1250mm EPO Electric RC Plane Ready-To-Fly
$429.00
$319.97 -
LX F4F Wildcat 47''/1200mm EPO Electric RC Airplane PNP
$499.00
$275.99 -
Dynam PBY Catalina Brushless/LIPO Electric RC Airplane PNP Blue
$329.00
$226.99 -
LX L-20 1280mm Wingspan Electric RC Plane
$288.00
$166.97 -
Volantex R/C TrainStar Exchange 747-6 Electric RC Plane Kit Version
$159.00
$123.97 -
LX F4 Phantom Twin 70mm EDF RC Jet Grey With Retracts Kit Version
$390.00
$168.99
Product Description
Condition: New.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.
Specification:
- Wingspan: 61" (1549.40mm)
- Length: 50-1/2"
- Wing Area: 413 sq. in
- Flying weight: 5-1/2 lbs
- Engine Required: .46-.50 2c, .52-.65 4c (not included)
Features:
This ARF boasts a hand laid fiberglass fuse and cowling with a gel coat outer finish. The exterior was then painted with a beautiful fuel-
proof epoxy color scheme, sure to grab the attention of everyone at the field. The engine box, formers, and servo tray are already
glassed into position. All wooden structures are built of laser cut components, professionally built and covered, ready for quick final assembly.
This kit is COMPLETE, loaded with all the hardware you'll need to get this bird finished and to the field, fast.