-
LX F4 Phantom Twin 70mm PNP EDF RC Jet Grey With Retracts
$499.00
$369.97 -
Dynam T-28 Trojan V2 1270mm (50") PNP RC Plane Red
$319.00
$209.97 -
Dynam BF-109 50'' V2 EPO Electric RC Airplane PNP With Motor/ESC/Servos/Prop/Retracts Installed
$329.00
$209.99 -
VolantexRC Vector28 2.4Ghz Super High Speed Pool Racer RC Boat (795-1) Ready-To-Run
$135.00
$39.97 -
Dynam F4U Corsair V2 50'' EPO Electric RC Airplane Warbird
$319.00
$201.99 -
Piper PA-18 Super CUB 1300mm Wingspan RC Plane PNP V3 With Reflex
$362.00
$246.92 -
Dynam Meteor Brushless 70mm EDF RC Jet RC Airplane 4-Ch RTF
$429.00
$299.97 -
Inspiration F3A 50e 50 Class 54" (1380mm) Precision Aerobatic RC Plane PNP
$399.00
$237.92 -
Z51 Predator 660mm Wingspan 2.4G 2CH EPP DIY Glider RC Airplane RTF Built-in Gyro
$139.00
$89.97 -
P-51D Mustang Yellow 750mm/30.00in EPO Electric RC Airplane PNP
$189.00
$108.99
Product Description
Described as the most outstanding fighter aircraft ever built, the awesome
F-22 Raptor has been faithfully recreated by FlyFly. This exciting model is
supplied complete with a purpose designed high-performance fan unit. The Raptor
has two intake ducts that route into a single EDF unit which when coupled to a
suitable B36 type brushless motor is capable of supplying truly amazing levels
of flight performance.
Constructed almost entirely from EPS foam, this airframe is very lightweight, but remarkably stiff and durable. Panel lines, inspection covers and other scale details are moulded in, with the menacing paint scheme applied at the factory.
Features:
* Semi-scale light weight styrofoam (EPS) airframe
* Moulded detailed panel lines and authentic colour scheme
* Powered by a single 90mm EDF unit
* Designed for 5 or 6S operation
* Requires only 2 servos (3 if installing a steerable nose-wheel)
* Experience level: Expert (this model is not for the faint hearted hence the low price)
Specification:
* Wingspan: 1150mm/45in
* Overall length :1300mm/51in
* Flying weight: approx. 1600g/3.52lb (dependent on battery choice)
* Motor: B36 type 1800KV brushless inrunner with a 5mm shaft (required)
* ESC: 60A Pro (required)
* Servos: delta mix/elevons 2 x 13-16g (required), nose wheel steering (optional)
* RC functions: elevons, thro
Kit contents:
* Moulded EPS airframe parts
* Clear canopy
* 92mm EDF unit
* Foam-safe adhesive
* All fasteners required to assemble the model, decal sheet, illustrated instruction sheet.
* Landing gear : Fix gear with suspensionsystem, optional retract gear available
EDF Unit Specification:
* Fan Diameter: 92mm
* Rotor: 7 blade, glass filled
* Shaft Dimension: 5mm
* Material: Nylon, ABS, aluminium
* Fan weight: 104g
* Motor class: B36 (540)
Required:
* Motor: 1500kv
* ESC: 60A
* Battery: 3200mAh 5S (18.5V) LiPo
* Radio System: min 4Ch TX and RX
* Servos 2 x 13-16g for elevons
* Servo extension leads: 2 x 600mm
* ESC-to-battery extension leads: 2 x 600mm silicone wire
* Tricycle landing gear (optional)
Video:
Constructed almost entirely from EPS foam, this airframe is very lightweight, but remarkably stiff and durable. Panel lines, inspection covers and other scale details are moulded in, with the menacing paint scheme applied at the factory.
Features:
* Semi-scale light weight styrofoam (EPS) airframe
* Moulded detailed panel lines and authentic colour scheme
* Powered by a single 90mm EDF unit
* Designed for 5 or 6S operation
* Requires only 2 servos (3 if installing a steerable nose-wheel)
* Experience level: Expert (this model is not for the faint hearted hence the low price)
Specification:
* Wingspan: 1150mm/45in
* Overall length :1300mm/51in
* Flying weight: approx. 1600g/3.52lb (dependent on battery choice)
* Motor: B36 type 1800KV brushless inrunner with a 5mm shaft (required)
* ESC: 60A Pro (required)
* Servos: delta mix/elevons 2 x 13-16g (required), nose wheel steering (optional)
* RC functions: elevons, thro
Kit contents:
* Moulded EPS airframe parts
* Clear canopy
* 92mm EDF unit
* Foam-safe adhesive
* All fasteners required to assemble the model, decal sheet, illustrated instruction sheet.
* Landing gear : Fix gear with suspensionsystem, optional retract gear available
EDF Unit Specification:
* Fan Diameter: 92mm
* Rotor: 7 blade, glass filled
* Shaft Dimension: 5mm
* Material: Nylon, ABS, aluminium
* Fan weight: 104g
* Motor class: B36 (540)
Required:
* Motor: 1500kv
* ESC: 60A
* Battery: 3200mAh 5S (18.5V) LiPo
* Radio System: min 4Ch TX and RX
* Servos 2 x 13-16g for elevons
* Servo extension leads: 2 x 600mm
* ESC-to-battery extension leads: 2 x 600mm silicone wire
* Tricycle landing gear (optional)
Video: