-
F6F Hellcat V2 50'' 1270mm Electric RC Airplane PNP With Flaps and Retracts
$359.00
$215.97 -
PT-17 Stearman 1400mm Balsa Pre-Built ARF RC Plane
$595.00
$329.99 -
Dynam Peaks Pitts Model 12 42''/1070mm Electric EPO RC Plane PNP
$319.00
$199.92 -
P-51D Mustang Yellow 750mm/30.00in EPO Electric RC Airplane PNP
$189.00
$97.99 -
J-3 Piper Cub 1400mm/55.1in EPO RC Airplane PNP
$359.00
$190.97 -
Dynam WACO (YNF-5D) 1270mm EPO RC Electric Plane PNP
$309.00
$205.99 -
F6F Hellcat 50'' 1270mm EPO Electric RC Airplane Ready-To-Fly
$399.00
$309.97 -
LX F4 Phantom Twin 70mm EDF RC Jet Grey With Retracts Kit Version
$390.00
$155.99 -
Dynam T-28 Trojan V2 1270mm (50") PNP RC Plane Red
$319.00
$209.97 -
Valkyrie 90mm EDF RC Jet PNP
$599.00
$399.99
Product Description
Described as the most outstanding fighter aircraft ever built, the awesome
F-22 Raptor has been faithfully recreated by FlyFly. This exciting model is
supplied complete with a purpose designed high-performance fan unit. The Raptor
has two intake ducts that route into a single EDF unit which when coupled to a
suitable B36 type brushless motor is capable of supplying truly amazing levels
of flight performance.
Constructed almost entirely from EPS foam, this airframe is very lightweight, but remarkably stiff and durable. Panel lines, inspection covers and other scale details are moulded in, with the menacing paint scheme applied at the factory.
Features:
* Semi-scale light weight styrofoam (EPS) airframe
* Moulded detailed panel lines and authentic colour scheme
* Powered by a single 90mm EDF unit
* Designed for 5 or 6S operation
* Requires only 2 servos (3 if installing a steerable nose-wheel)
* Experience level: Expert (this model is not for the faint hearted hence the low price)
Specification:
* Wingspan: 1150mm/45in
* Overall length :1300mm/51in
* Flying weight: approx. 1600g/3.52lb (dependent on battery choice)
* Motor: B36 type 1800KV brushless inrunner with a 5mm shaft (required)
* ESC: 60A Pro (required)
* Servos: delta mix/elevons 2 x 13-16g (required), nose wheel steering (optional)
* RC functions: elevons, thro
Kit contents:
* Moulded EPS airframe parts
* Clear canopy
* 92mm EDF unit
* Foam-safe adhesive
* All fasteners required to assemble the model, decal sheet, illustrated instruction sheet.
* Landing gear : Fix gear with suspensionsystem, optional retract gear available
EDF Unit Specification:
* Fan Diameter: 92mm
* Rotor: 7 blade, glass filled
* Shaft Dimension: 5mm
* Material: Nylon, ABS, aluminium
* Fan weight: 104g
* Motor class: B36 (540)
Required:
* Motor: 1500kv
* ESC: 60A
* Battery: 3200mAh 5S (18.5V) LiPo
* Radio System: min 4Ch TX and RX
* Servos 2 x 13-16g for elevons
* Servo extension leads: 2 x 600mm
* ESC-to-battery extension leads: 2 x 600mm silicone wire
* Tricycle landing gear (optional)
Video:
Constructed almost entirely from EPS foam, this airframe is very lightweight, but remarkably stiff and durable. Panel lines, inspection covers and other scale details are moulded in, with the menacing paint scheme applied at the factory.
Features:
* Semi-scale light weight styrofoam (EPS) airframe
* Moulded detailed panel lines and authentic colour scheme
* Powered by a single 90mm EDF unit
* Designed for 5 or 6S operation
* Requires only 2 servos (3 if installing a steerable nose-wheel)
* Experience level: Expert (this model is not for the faint hearted hence the low price)
Specification:
* Wingspan: 1150mm/45in
* Overall length :1300mm/51in
* Flying weight: approx. 1600g/3.52lb (dependent on battery choice)
* Motor: B36 type 1800KV brushless inrunner with a 5mm shaft (required)
* ESC: 60A Pro (required)
* Servos: delta mix/elevons 2 x 13-16g (required), nose wheel steering (optional)
* RC functions: elevons, thro
Kit contents:
* Moulded EPS airframe parts
* Clear canopy
* 92mm EDF unit
* Foam-safe adhesive
* All fasteners required to assemble the model, decal sheet, illustrated instruction sheet.
* Landing gear : Fix gear with suspensionsystem, optional retract gear available
EDF Unit Specification:
* Fan Diameter: 92mm
* Rotor: 7 blade, glass filled
* Shaft Dimension: 5mm
* Material: Nylon, ABS, aluminium
* Fan weight: 104g
* Motor class: B36 (540)
Required:
* Motor: 1500kv
* ESC: 60A
* Battery: 3200mAh 5S (18.5V) LiPo
* Radio System: min 4Ch TX and RX
* Servos 2 x 13-16g for elevons
* Servo extension leads: 2 x 600mm
* ESC-to-battery extension leads: 2 x 600mm silicone wire
* Tricycle landing gear (optional)
Video: