-
TopRC Cessna 182 965mm Wingspan RC Plane PNP
$199.00
$97.99 -
VolantexRC Tumbler Auto-roll-back Pool Racer RC Boat (796-1) Ready-To-Run
$139.00
$49.97 -
TopRC P-51D Mustang 750mm/30.00in EPO Electric RC Airplane Ready-To-Fly Blue
$289.00
$199.97 -
VolanterRC FPVraptor V2 Tower UAV Trim Scheme 2M Unibody Pusher (757-V2) Eelctric RC Glider Kit Version
$159.00
$109.97 -
Dynam Hawker Hurricane 49''/1250mm EPO Electric RC Plane PNP
$329.00
$205.99 -
P-51 P51 P-51D Mustang 2.4G 4CH Electric R/C RC Airplane Plane 100% Ready To Fly
$259.92 -
Dynam Messerschmitt ME-262 1500mm Twin 70mm EDF Jet Ready-To-Fly
$599.00
$409.97 -
TopRC F4U Corsair Blue 750mm/30.00in EPO Electric RC Airplane Ready-To-Fly
$289.00
$199.99 -
Volantex RC Vector 80 (cm) High speed ABS Unibody Boats 798-1 brushless PNP
$229.00
$121.99 -
TopRC Jet Star 800mm Wingspan RC Jet PNP Red
$259.00
$168.97
Product Description
Described as the most outstanding fighter aircraft ever built, the awesome
F-22 Raptor has been faithfully recreated by FlyFly. This exciting model is
supplied complete with a purpose designed high-performance fan unit. The Raptor
has two intake ducts that route into a single EDF unit which when coupled to a
suitable B36 type brushless motor is capable of supplying truly amazing levels
of flight performance.
Constructed almost entirely from EPS foam, this airframe is very lightweight, but remarkably stiff and durable. Panel lines, inspection covers and other scale details are moulded in, with the menacing paint scheme applied at the factory.
Features:
* Semi-scale light weight styrofoam (EPS) airframe
* Moulded detailed panel lines and authentic colour scheme
* Powered by a single 90mm EDF unit
* Designed for 5 or 6S operation
* Requires only 2 servos (3 if installing a steerable nose-wheel)
* Experience level: Expert (this model is not for the faint hearted hence the low price)
Specification:
* Wingspan: 1150mm/45in
* Overall length :1300mm/51in
* Flying weight: approx. 1600g/3.52lb (dependent on battery choice)
* Motor: B36 type 1800KV brushless inrunner with a 5mm shaft (required)
* ESC: 60A Pro (required)
* Servos: delta mix/elevons 2 x 13-16g (required), nose wheel steering (optional)
* RC functions: elevons, thro
Kit contents:
* Moulded EPS airframe parts
* Clear canopy
* 92mm EDF unit
* Foam-safe adhesive
* All fasteners required to assemble the model, decal sheet, illustrated instruction sheet.
* Landing gear : Fix gear with suspensionsystem, optional retract gear available
EDF Unit Specification:
* Fan Diameter: 92mm
* Rotor: 7 blade, glass filled
* Shaft Dimension: 5mm
* Material: Nylon, ABS, aluminium
* Fan weight: 104g
* Motor class: B36 (540)
Required:
* Motor: 1500kv
* ESC: 60A
* Battery: 3200mAh 5S (18.5V) LiPo
* Radio System: min 4Ch TX and RX
* Servos 2 x 13-16g for elevons
* Servo extension leads: 2 x 600mm
* ESC-to-battery extension leads: 2 x 600mm silicone wire
* Tricycle landing gear (optional)
Video:
Constructed almost entirely from EPS foam, this airframe is very lightweight, but remarkably stiff and durable. Panel lines, inspection covers and other scale details are moulded in, with the menacing paint scheme applied at the factory.
Features:
* Semi-scale light weight styrofoam (EPS) airframe
* Moulded detailed panel lines and authentic colour scheme
* Powered by a single 90mm EDF unit
* Designed for 5 or 6S operation
* Requires only 2 servos (3 if installing a steerable nose-wheel)
* Experience level: Expert (this model is not for the faint hearted hence the low price)
Specification:
* Wingspan: 1150mm/45in
* Overall length :1300mm/51in
* Flying weight: approx. 1600g/3.52lb (dependent on battery choice)
* Motor: B36 type 1800KV brushless inrunner with a 5mm shaft (required)
* ESC: 60A Pro (required)
* Servos: delta mix/elevons 2 x 13-16g (required), nose wheel steering (optional)
* RC functions: elevons, thro
Kit contents:
* Moulded EPS airframe parts
* Clear canopy
* 92mm EDF unit
* Foam-safe adhesive
* All fasteners required to assemble the model, decal sheet, illustrated instruction sheet.
* Landing gear : Fix gear with suspensionsystem, optional retract gear available
EDF Unit Specification:
* Fan Diameter: 92mm
* Rotor: 7 blade, glass filled
* Shaft Dimension: 5mm
* Material: Nylon, ABS, aluminium
* Fan weight: 104g
* Motor class: B36 (540)
Required:
* Motor: 1500kv
* ESC: 60A
* Battery: 3200mAh 5S (18.5V) LiPo
* Radio System: min 4Ch TX and RX
* Servos 2 x 13-16g for elevons
* Servo extension leads: 2 x 600mm
* ESC-to-battery extension leads: 2 x 600mm silicone wire
* Tricycle landing gear (optional)
Video: