-
DW Hobby 61" Fokker DR1 Triplane Laser Cut Balsawood RC Airplane Model Kit
$506.00
$259.97 -
Unique Models Cessna 182 1410mm EPO Electric RC Plane PNP
$329.00
$165.99 -
Dynam T-28 Trojan V2 1270mm EPO RC Plane With Retracts PNP Yellow
$319.00
$229.97 -
P-51 Mustang 30'' RC Plane PNP
$189.00
$79.99 -
Cessna 43'' Durable RC Plane Ready-To-Fly
$329.00
$229.97 -
Dynam Sbach 342 Aerobatic RC Plane 1250mm Ready-To-Fly
$399.00
$319.97 -
LX F4 Phantom Twin 70mm PNP EDF RC Jet Grey With Retracts
$499.00
$389.97 -
Dynam Spitfire 1200mm V3 RC Plane Warbird with Flaps Ready-To-Fly
$429.00
$299.97 -
F6F Hellcat 50'' 1270mm EPO Electric RC Airplane Ready-To-Fly
$399.00
$309.97 -
Twin Otter DHC-6 1800mm/70.9'' with Floats RC Plane PNP
$720.00
$432.92
Product Description
Specifications:
Main rotor diameter: 530mm;
Weight: 305g;
Length: 520mm;
Main blade: wooden;
Power system: 370 motor (included);
Control mode: CCPM system;
Transmitter: 6CH CCPM system (not included);
Servo: 8g,1.3kg.CM,0.13s/60 (included)
Battery: 11.1V 1000mAh Li-Polymer(not included);
Features:
This helicopter is suitable for intermediate pilot or pilot who want to try inverted fly and mild 3D flight.
120 deg CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter,and weight is greatly reduced.
Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds.
O-ring inside the center hub reduce oscillation of main blades
11.1V high capacitance Li-Po battery provide enough power for any aerobatic flight(about 15 min flight time per full charge).
Light and hardened wood blade provide great lift, only weigh 11g.
Metal ball swashplate has improved the stability and sensitive of the whole machine.
Pre position servo mounts have been added in this heli, servos can be mounted solidly by screw and easy to install.
With length-adjustable servo push-rod, precision sub trim can be easily set.
Separate main shaft and main gear reduce repair time and noise.
Extended tail boom, reduced the load of tail motor.
Weight is a key to a EP heli, lightened skid set, main gear, main frame and canopy reduce the load of whole heli.
Provide excellent performance outdoor and indoor.
Main rotor diameter: 530mm;
Weight: 305g;
Length: 520mm;
Main blade: wooden;
Power system: 370 motor (included);
Control mode: CCPM system;
Transmitter: 6CH CCPM system (not included);
Servo: 8g,1.3kg.CM,0.13s/60 (included)
Battery: 11.1V 1000mAh Li-Polymer(not included);
Features:
This helicopter is suitable for intermediate pilot or pilot who want to try inverted fly and mild 3D flight.
120 deg CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter,and weight is greatly reduced.
Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds.
O-ring inside the center hub reduce oscillation of main blades
11.1V high capacitance Li-Po battery provide enough power for any aerobatic flight(about 15 min flight time per full charge).
Light and hardened wood blade provide great lift, only weigh 11g.
Metal ball swashplate has improved the stability and sensitive of the whole machine.
Pre position servo mounts have been added in this heli, servos can be mounted solidly by screw and easy to install.
With length-adjustable servo push-rod, precision sub trim can be easily set.
Separate main shaft and main gear reduce repair time and noise.
Extended tail boom, reduced the load of tail motor.
Weight is a key to a EP heli, lightened skid set, main gear, main frame and canopy reduce the load of whole heli.
Provide excellent performance outdoor and indoor.