-
XK X450 VTOL 2.4G 6CH EPO 450mm Wingspan 3D/6G Mode Aerobatics RC Airplane Ready-To-Fly Out of Box
$199.00
$118.99 -
Dynam Cessna 182 50'' Electric RC Plane Ready-To-Fly
$399.00
$319.97 -
PBY Catalina 2.4G Brushless/LIPO Electric RC Airplane PNP
$359.00
$237.99 -
Dynam Spitfire 1200mm V3 RC Plane Warbird with Flaps PNP
$359.00
$210.99 -
TopRC F-18 Blue Angel 686mm Wingspan RC Jet Ready-To-Fly
$399.00
$289.99 -
Dynam Albatross RC Bi-Plane 1270mm Electric RC Plane Ready-To-Fly
$429.00
$319.99 -
Dynam Meteor Brushless 70mm EDF RC Jet RC Airplane 4-Ch RTF
$429.00
$299.97 -
SBach 342 50E 55'' Thunderbolt Aerobatic RC Airplane A
$399.00
$220.97 -
Dynam SR22 1400mm V2 RC Plane with Flaps PNP Yellow
$359.00
$175.99 -
Volantex RC Vector 80 (cm) High speed ABS Unibody Boats 798-1 brushless PNP
$229.00
$121.99
Product Description
Specifications:
Main rotor diameter: 530mm;
Weight: 305g;
Length: 520mm;
Main blade: wooden;
Power system: 370 motor (included);
Control mode: CCPM system;
Transmitter: 6CH CCPM system (not included);
Servo: 8g,1.3kg.CM,0.13s/60 (included)
Battery: 11.1V 1000mAh Li-Polymer(not included);
Features:
This helicopter is suitable for intermediate pilot or pilot who want to try inverted fly and mild 3D flight.
120 deg CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter,and weight is greatly reduced.
Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds.
O-ring inside the center hub reduce oscillation of main blades
11.1V high capacitance Li-Po battery provide enough power for any aerobatic flight(about 15 min flight time per full charge).
Light and hardened wood blade provide great lift, only weigh 11g.
Metal ball swashplate has improved the stability and sensitive of the whole machine.
Pre position servo mounts have been added in this heli, servos can be mounted solidly by screw and easy to install.
With length-adjustable servo push-rod, precision sub trim can be easily set.
Separate main shaft and main gear reduce repair time and noise.
Extended tail boom, reduced the load of tail motor.
Weight is a key to a EP heli, lightened skid set, main gear, main frame and canopy reduce the load of whole heli.
Provide excellent performance outdoor and indoor.
Main rotor diameter: 530mm;
Weight: 305g;
Length: 520mm;
Main blade: wooden;
Power system: 370 motor (included);
Control mode: CCPM system;
Transmitter: 6CH CCPM system (not included);
Servo: 8g,1.3kg.CM,0.13s/60 (included)
Battery: 11.1V 1000mAh Li-Polymer(not included);
Features:
This helicopter is suitable for intermediate pilot or pilot who want to try inverted fly and mild 3D flight.
120 deg CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter,and weight is greatly reduced.
Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds.
O-ring inside the center hub reduce oscillation of main blades
11.1V high capacitance Li-Po battery provide enough power for any aerobatic flight(about 15 min flight time per full charge).
Light and hardened wood blade provide great lift, only weigh 11g.
Metal ball swashplate has improved the stability and sensitive of the whole machine.
Pre position servo mounts have been added in this heli, servos can be mounted solidly by screw and easy to install.
With length-adjustable servo push-rod, precision sub trim can be easily set.
Separate main shaft and main gear reduce repair time and noise.
Extended tail boom, reduced the load of tail motor.
Weight is a key to a EP heli, lightened skid set, main gear, main frame and canopy reduce the load of whole heli.
Provide excellent performance outdoor and indoor.