-
Focke-Wulf Ta-152H 1.3M PNP RC Plane
$399.00
$218.92 -
PT-17 Stearman 1600mm Pre-Built Balsa ARF RC Plane (SCG35)
$950.00
$499.92 -
A-10 Thunderbolt II Twin 50mm EDF Jet PNP
$299.00
$168.99 -
Lanyu ASW28 2.6m/103'' Unibody Scale RC Glider (759-1) Ready-To-Fly
$399.00
$319.97 -
Aggressor FPV 1200mm Wingspan RC Plane PNP
$305.00
$209.99 -
Valkyrie 90mm EDF RC Jet PNP
$599.00
$399.99 -
F-86 64mm 12 Blade EDF RC Jet PNP With Vector Stabilizer
$299.00
$169.92 -
Dynam Hawker Tempest 1250mm Electric RC Plane PNP
$319.00
$192.95 -
F-105 Thunderchief 64mm EDF RC Jet Plane PNP
$199.00
$149.99 -
VolanterRC FPVraptor V2 Tower UAV Trim Scheme 2M Unibody Pusher (757-V2) Eelctric RC Glider Kit Version
$159.00
$109.97
Product Description
It is the upgraded version (V2) of the Dynam T-28 Trojan. This new version of Dynam T-28 Trojan V2 Red features a Tomcat Skylord-50A ESC, retractable landing gear, and pre-installed flap servos, adding realism to your flying experience. The North American Aviation T-28 Trojan was a piston-engined military trainer aircraft used by the US Air Force and the US Navy in the 1950s. Besides being a trainer, the T-28 was successfully employed as a Counter-insurgency (COIN) aircraft, primarily during the Vietnam War.
FEATURES:
Pre-installed and fully operational flaps and flap servos
Realistic scale features including US Navy paint scheme
Hand painted pilot figures and molded panel lines
Servoless electronic retractable landing gear
Scale 3-blade propeller
SPECIFICATIONS:
AGE LEVEL : 14 AND UP SKILL LEVEL : INTERMEDIATE BUILD TIME : 3+ HOURS
Wingspan: 1270mm / 50in
Length: 1000mm / 39.3in
Flying Weight: 1350g / 47.6oz
CG (Center of Gravity) 70 - 75mm from the leading edge at the wing root
Power System: Detrum BM3720-800KV brushless outrunner motor
Electronic Speed Control: TomCat Skylord-50A
Propeller: 3-Blade Prop
Servos: 4x 9g standard
Landing Gear: Retractable
Required Battery: 3S 11.1V 2200mAh 20C LiPo with XT60 connector (not included)
Required Radio: 5 Channel (not included)
Ailerons: Yes
Elevator: Yes
Rudder: Yes
Flaps: Ready, servos installed
Hinge Type: Foam
Material: EPO Foam
FEATURES:
Pre-installed and fully operational flaps and flap servos
Realistic scale features including US Navy paint scheme
Hand painted pilot figures and molded panel lines
Servoless electronic retractable landing gear
Scale 3-blade propeller
SPECIFICATIONS:
AGE LEVEL : 14 AND UP SKILL LEVEL : INTERMEDIATE BUILD TIME : 3+ HOURS
Wingspan: 1270mm / 50in
Length: 1000mm / 39.3in
Flying Weight: 1350g / 47.6oz
CG (Center of Gravity) 70 - 75mm from the leading edge at the wing root
Power System: Detrum BM3720-800KV brushless outrunner motor
Electronic Speed Control: TomCat Skylord-50A
Propeller: 3-Blade Prop
Servos: 4x 9g standard
Landing Gear: Retractable
Required Battery: 3S 11.1V 2200mAh 20C LiPo with XT60 connector (not included)
Required Radio: 5 Channel (not included)
Ailerons: Yes
Elevator: Yes
Rudder: Yes
Flaps: Ready, servos installed
Hinge Type: Foam
Material: EPO Foam