-
XK X450 VTOL 2.4G 6CH EPO 450mm Wingspan 3D/6G Mode Aerobatics RC Airplane Ready-To-Fly Out of Box
$199.00
$118.99 -
Cessna 43'' Durable RC Plane Ready-To-Fly
$329.00
$229.97 -
Dynam WACO (YNF-5D) 1270mm EPO RC Electric Plane PNP
$309.00
$225.99 -
Z51 Predator 660mm Wingspan 2.4G 2CH EPP DIY Glider RC Airplane RTF Built-in Gyro
$139.00
$89.97 -
P-40 1100mm Wingspan RC Plane PNP
$359.00
$238.99 -
Dynam Peaks Pitts Model 12 42''/1070mm Electric EPO RC Plane PNP
$319.00
$206.99 -
VolantexRC Saber 920 3D RC Plane PNP Model No TW-756-2
$235.00
$123.97 -
Viper 64mm EDF RC Jet PNP Etihad
$305.00
$187.99 -
Dynam Primo 1450mm Wingspan RC Airplane PNP
$329.00
$195.97 -
Dynam F4U Corsair 1270mm (50") Wingspan RC Airplane Ready-To-Fly
$429.00
$319.99
Product Description
This is the new and improved version (V2) of the Dynam T-28 Trojan. It includes
a Tomcat Skylord 30 Amp ESC with XT60 connector, pre-installed flaps and
pre-installed flap servos. It also features servoless electronic retractable
landing gear.
FEATURES:
Tomcat Skylord 30 Amp ESCs with XT60 connector
Pre-installed and fully operational flaps and flap servos
Realistic scale features including US Navy paint scheme
Hand painted pilot figures and molded panel lines
Servoless electronic retractable landing gear
Powerful BM3715A-KV890 Brushless Outrunner motor
Scale 3-blade propeller
SPECIFICATIONS:
AGE LEVEL : 14 AND UP SKILL LEVEL : INTERMEDIATE BUILD TIME : 3+ HOURS
Wingspan: 1270mm / 50in
Length: 1000mm / 39.3in
Flying Weight: 1350g / 47.6oz
CG (Center of Gravity) 70 - 75mm from the leading edge at the wing root
Power System: BM3715A-KV890 Brushless Outrunner Motor
Electronic Speed Control: 30A Brushless with XT60 connector
Propeller: 3-Blade Prop
Servos: 4x 9g standard
Landing Gear: Retractable
Required Battery: 3S 11.1V 2200mAh 20C LiPo with XT60 connector (not included)
Required Radio: 5 Channel (not included)
Ailerons: Yes
Elevator: Yes
Rudder: Yes
Flaps: Ready, servos installed
Hinge Type: Foam
Material: EPO Foam
FEATURES:
Tomcat Skylord 30 Amp ESCs with XT60 connector
Pre-installed and fully operational flaps and flap servos
Realistic scale features including US Navy paint scheme
Hand painted pilot figures and molded panel lines
Servoless electronic retractable landing gear
Powerful BM3715A-KV890 Brushless Outrunner motor
Scale 3-blade propeller
SPECIFICATIONS:
AGE LEVEL : 14 AND UP SKILL LEVEL : INTERMEDIATE BUILD TIME : 3+ HOURS
Wingspan: 1270mm / 50in
Length: 1000mm / 39.3in
Flying Weight: 1350g / 47.6oz
CG (Center of Gravity) 70 - 75mm from the leading edge at the wing root
Power System: BM3715A-KV890 Brushless Outrunner Motor
Electronic Speed Control: 30A Brushless with XT60 connector
Propeller: 3-Blade Prop
Servos: 4x 9g standard
Landing Gear: Retractable
Required Battery: 3S 11.1V 2200mAh 20C LiPo with XT60 connector (not included)
Required Radio: 5 Channel (not included)
Ailerons: Yes
Elevator: Yes
Rudder: Yes
Flaps: Ready, servos installed
Hinge Type: Foam
Material: EPO Foam