-
P-38 1200mm Wingspan EPO RC Airplane Unpainted Kit
$220.00
$99.92 -
Geronimo 3.0m Electric Glider
$599.00
$397.99 -
TopRC A1 Blue 800mm/32'' EPO Electric RC Airplane PNP
$199.00
$109.97 -
Dynam Hawker Tempest 1250mm Electric RC Plane PNP
$319.00
$192.95 -
F-18 Twin 40mm EDF Jet F18 Hornet RC Plane Model PNP
$265.00
$169.92 -
Starmax F/A-18C Hornet Jolly Rogers 70mm Electric EDF RC Jet Ready-To-Fly
$399.00
$259.92 -
PA-18 Super Cub 1700mm RC Plane PNP
$399.00
$289.92 -
Volantex R/C TrainStar Exchange 747-6 Electric RC Plane Kit Version
$159.00
$123.97 -
F/A-18E 4S 64mm EDF Jet Royal Maces RC Plane PNP
$310.00
$162.92 -
Saber 920 3D RC Plane PNP
$235.00
$130.97
Product Description
The Dynam A-10 Thunderbolt II also known as "The Warthog" is an American
single-seat, twin-engine, straight-wing jet aircraft designed to provide close
air support of ground forces. The A-10 earned its reputation as the "Tank
Buster" with its assortment of lethal air to ground armaments effectively
annihilation enemy ground forces and reinforcements. It was the first USAF
aircraft designed exclusively for close air support.
The Dynam A-10 has been an awesome flying machine in the Dynam Fleet. Dynam decided to upgrade this bird with servo-less retracts. The A-10 has superb maneuverability even at low speeds and altitude, this is due to its large wing area, high wing aspect ratio, and large ailerons. This design also enables short takeoffs and landings, allowing it to operate from the smallest and most basic airfields. This model gets power from two 64mm electric ducted fan units and lets of an awesome sound during flight. All servos, motors, and retracts are preinstalled from factory. Like all the planes in the Dynam range, the Dynam A-10 is constructed of quality EPO foam and finished to a high standard that represents an excellent replica of the real aircraft.
This almost ready to fly version twin 40A electronics speed controllers provide power to the twin 64mm 3300kv ducted fan units. You will need an 11.1v 2200mah battery, charger, and radio system to complete the electronics requirements. You will also need to complete assembly of the plane to get it ready for flight.
Please note: The Dynam retracts are not compatible with the Airtronics FHSS-1 radio system, they will work with their new FHSS-2 and FHSS-3 radio system.
Specifications:
Wing span: 1080mm/42.5''
Total Length: 995mm/39.17''
Flying weight: 1000g/35.27oz
Construction: EPO
Servo: 4x9g
ESC: 2x 40A Brushless with T connector
Power: BM2815D-KV3600X Twin EDF motors and 64mm electronic ducted fan units
Landing Gear: Retractable
Required to Fly (not included):
Assembly of Plane
11.1V 2200mAh 25C Li-Po
Charger capable of 3s Li-Po charging
Minimum 5 Channel Receiver
Minimum 5 Channel Transmitter system
Flight Video:
The Dynam A-10 has been an awesome flying machine in the Dynam Fleet. Dynam decided to upgrade this bird with servo-less retracts. The A-10 has superb maneuverability even at low speeds and altitude, this is due to its large wing area, high wing aspect ratio, and large ailerons. This design also enables short takeoffs and landings, allowing it to operate from the smallest and most basic airfields. This model gets power from two 64mm electric ducted fan units and lets of an awesome sound during flight. All servos, motors, and retracts are preinstalled from factory. Like all the planes in the Dynam range, the Dynam A-10 is constructed of quality EPO foam and finished to a high standard that represents an excellent replica of the real aircraft.
This almost ready to fly version twin 40A electronics speed controllers provide power to the twin 64mm 3300kv ducted fan units. You will need an 11.1v 2200mah battery, charger, and radio system to complete the electronics requirements. You will also need to complete assembly of the plane to get it ready for flight.
Please note: The Dynam retracts are not compatible with the Airtronics FHSS-1 radio system, they will work with their new FHSS-2 and FHSS-3 radio system.
Specifications:
Wing span: 1080mm/42.5''
Total Length: 995mm/39.17''
Flying weight: 1000g/35.27oz
Construction: EPO
Servo: 4x9g
ESC: 2x 40A Brushless with T connector
Power: BM2815D-KV3600X Twin EDF motors and 64mm electronic ducted fan units
Landing Gear: Retractable
Required to Fly (not included):
Assembly of Plane
11.1V 2200mAh 25C Li-Po
Charger capable of 3s Li-Po charging
Minimum 5 Channel Receiver
Minimum 5 Channel Transmitter system
Flight Video: