-
VolanterRC FPVraptor V2 Tower UAV Trim Scheme 2M Unibody Pusher (757-V2) Eelctric RC Glider Kit Version
$159.00
$109.97 -
Bleriot XI Wingspan 1800mm ARF Pre-Built Balsawood Scale Airplane SCG34
$999.00
$499.92 -
Dynam A-10 Thunderbolt II V2 Twin 64mm EDF RC Jet with Retracts 1080mm Wingspan Ready-To-Fly
$429.00
$319.97 -
LX F4 Phantom Twin 70mm PNP EDF RC Jet Grey With Retracts
$499.00
$369.97 -
VolantexRC Vector 40(cm) High speed racing boat ABS Unibody (797-1) Ready-To-Run Brushed Version
$139.00
$65.98 -
Fox 3M/118'' RC Glider Electric Motor Version
$629.00
$399.97 -
Dynam DHC-2 Beaver 1500mm (59") Wingspan Electric RC Plane Ready-To-Fly
$429.00
$319.97 -
Valkyrie 90mm EDF RC Jet PNP
$599.00
$399.99 -
FW-190 1200mm/47in EPO Electric RC Airplane PNP
$329.00
$197.92 -
Dynam Hawker Hurricane 49''/1250mm EPO Electric RC Plane Ready-To-Fly
$429.00
$319.97
Product Description
The Dynam A-10 Thunderbolt II also known as "The Warthog" is an American
single-seat, twin-engine, straight-wing jet aircraft designed to provide close
air support of ground forces. The A-10 earned its reputation as the "Tank
Buster" with its assortment of lethal air to ground armaments effectively
annihilation enemy ground forces and reinforcements. It was the first USAF
aircraft designed exclusively for close air support.
The Dynam A-10 has been an awesome flying machine in the Dynam Fleet. Dynam decided to upgrade this bird with servo-less retracts. The A-10 has superb maneuverability even at low speeds and altitude, this is due to its large wing area, high wing aspect ratio, and large ailerons. This design also enables short takeoffs and landings, allowing it to operate from the smallest and most basic airfields. This model gets power from two 64mm electric ducted fan units and lets of an awesome sound during flight. All servos, motors, and retracts are preinstalled from factory. Like all the planes in the Dynam range, the Dynam A-10 is constructed of quality EPO foam and finished to a high standard that represents an excellent replica of the real aircraft.
This almost ready to fly version twin 40A electronics speed controllers provide power to the twin 64mm 3300kv ducted fan units. You will need an 11.1v 2200mah battery, charger, and radio system to complete the electronics requirements. You will also need to complete assembly of the plane to get it ready for flight.
Please note: The Dynam retracts are not compatible with the Airtronics FHSS-1 radio system, they will work with their new FHSS-2 and FHSS-3 radio system.
Specifications:
Wing span: 1080mm/42.5''
Total Length: 995mm/39.17''
Flying weight: 1000g/35.27oz
Construction: EPO
Servo: 4x9g
ESC: 2x 40A Brushless with T connector
Power: BM2815D-KV3600X Twin EDF motors and 64mm electronic ducted fan units
Landing Gear: Retractable
Required to Fly (not included):
Assembly of Plane
11.1V 2200mAh 25C Li-Po
Charger capable of 3s Li-Po charging
Minimum 5 Channel Receiver
Minimum 5 Channel Transmitter system
Flight Video:
The Dynam A-10 has been an awesome flying machine in the Dynam Fleet. Dynam decided to upgrade this bird with servo-less retracts. The A-10 has superb maneuverability even at low speeds and altitude, this is due to its large wing area, high wing aspect ratio, and large ailerons. This design also enables short takeoffs and landings, allowing it to operate from the smallest and most basic airfields. This model gets power from two 64mm electric ducted fan units and lets of an awesome sound during flight. All servos, motors, and retracts are preinstalled from factory. Like all the planes in the Dynam range, the Dynam A-10 is constructed of quality EPO foam and finished to a high standard that represents an excellent replica of the real aircraft.
This almost ready to fly version twin 40A electronics speed controllers provide power to the twin 64mm 3300kv ducted fan units. You will need an 11.1v 2200mah battery, charger, and radio system to complete the electronics requirements. You will also need to complete assembly of the plane to get it ready for flight.
Please note: The Dynam retracts are not compatible with the Airtronics FHSS-1 radio system, they will work with their new FHSS-2 and FHSS-3 radio system.
Specifications:
Wing span: 1080mm/42.5''
Total Length: 995mm/39.17''
Flying weight: 1000g/35.27oz
Construction: EPO
Servo: 4x9g
ESC: 2x 40A Brushless with T connector
Power: BM2815D-KV3600X Twin EDF motors and 64mm electronic ducted fan units
Landing Gear: Retractable
Required to Fly (not included):
Assembly of Plane
11.1V 2200mAh 25C Li-Po
Charger capable of 3s Li-Po charging
Minimum 5 Channel Receiver
Minimum 5 Channel Transmitter system
Flight Video: