-
Dynam C-47 Transporter V2 Brushless RC Airplane PNP
$339.00
$243.97 -
SBach 342 50E 55'' Thunderbolt Aerobatic RC Airplane A
$399.00
$220.97 -
Dynam 1200mm Spitfire Warbird 100% Ready-To-Fly Electric RC Airplane
$429.00
$319.97 -
Dynam T-28 Trojan 1270mm EPO RC Plane With Retracts Ready-To-Fly
$399.00
$319.97 -
2.4Ghz 4-CH 64mm EDF F-15 Remote Control Jet w/ Brushless Motor/ESC/Lipo 100% RTF Grey
$369.00
$239.97 -
Dynam Turbo Jet V2 Twin 64mm EDF Jet 1180mm (46") Wingspan with Electronic Retracts and Flaps PNP
$319.00
$245.97 -
Dynam Hawker Hurricane 49''/1250mm EPO Electric RC Plane Ready-To-Fly
$429.00
$319.97 -
Dynam SR22 1400mm V2 RC Plane with Flaps PNP Yellow
$359.00
$175.99 -
Dynam Devil 3D Sport Aerobatic Bi-Plane EPO Electric RC Plane Ready-To-Fly
$399.00
$319.97 -
AT-6 Texan 5-CH 2.4Ghz 1370mm Electric R/C RC Airplane Plane Ready To Fly
$399.92
$299.97
Product Description
Introduction
Dynam SR-22 is a 1:12 scale of the SR-22, 4 seats Single-Engine composit airplane from 2000. The airplane has a modern and aerodynamic Looks. Dynam SR-22 is constructet by the strang materia EPO that can stand crashes. The model is equiptet by a powerfull brushless motor and 40A ESC to make the airplane powerfull with longer flight-time. The high Aspect-ratio wings makes the airplane very stable with good Glide-ratio. All servoes, receiver, Brushless Motor and ESC are preinstalled from the factory. All you need is to add a receiver and fly your model. The model is suitable for pilots who wants their first Low-Wing trainer to advanced pilots. The building-time is 45min
Specifications:
Model No. DY8936V2
Model Name SR22
Material EPO Foam
Wing Span 1400mm(55.1in)
Flying Weight 880g
Wing Loading 44g/dm²
Fuselage Length 965mm(38in)
CG 30 - 35mm from the leading edge of the wing at the root
Motor Detrum BM2815A-KV1100
ESC TC Skylord 40A ESC
Propeller 3-Blade Prop 9*6*3
Servo 6x 9g
Elevator Yes
Rudder Yes
Ailerons Yes
Flaps Yes
Landing Gear Fixed
EDF N/A
Floats N/A
Tx Requirement 6-Channel or above transmitter (not included)
Rx Requirement 6-Channel receiver (not included)
Li-Po Battery 11.1V 2200mAh 25C (not included)
Appr. Assembly Time 0.5 hour