-
Dynam Turbo Jet V2 Twin 64mm EDF Jet 1180mm (46") Wingspan with Electronic Retracts and Flaps PNP
$319.00
$223.97 -
Volantex ASW28 2.6m/103'' Unibody Scale RC Glider (759-1) PNP
$289.00
$182.95 -
Lanyu ASW28 2.6m/103'' Unibody Scale RC Glider (759-1) Ready-To-Fly
$399.00
$319.97 -
DW Hobby Fokker E 1200mm Wingspan Electric RC Airplane Laser Cut Balsa Kit
$280.00
$159.91 -
P-38 1200mm Wingspan EPO RC Airplane Unpainted Kit
$220.00
$109.92 -
Savage Bobber 1000mm (39.4in) Wingspan Balsawood 3D Pre-Built ARF Plane
$280.00
$168.98 -
SlowPoke 1200mm RC Plane PNP
$302.00
$169.99 -
Turbo Bushmaster STOL 72"(1830mm) Wingspan 6CH with Flaps and LED Lights (Night Flyer) PNP
$699.00
$428.92 -
Hawker Hurricane 750mm/30'' EPO Electric RC Airplane PNP Green
$189.00
$98.97 -
F-18E/F 70mm EDF RC Jet Ready-To-Fly
$369.00
$239.97
Product Description
Introduction
Dynam SR-22 is a 1:12 scale of the SR-22, 4 seats Single-Engine composit airplane from 2000. The airplane has a modern and aerodynamic Looks. Dynam SR-22 is constructet by the strang materia EPO that can stand crashes. The model is equiptet by a powerfull brushless motor and 40A ESC to make the airplane powerfull with longer flight-time. The high Aspect-ratio wings makes the airplane very stable with good Glide-ratio. All servoes, receiver, Brushless Motor and ESC are preinstalled from the factory. All you need is to add a receiver and fly your model. The model is suitable for pilots who wants their first Low-Wing trainer to advanced pilots. The building-time is 45min
Specifications:
Model No. DY8936V2
Model Name SR22
Material EPO Foam
Wing Span 1400mm(55.1in)
Flying Weight 880g
Wing Loading 44g/dm²
Fuselage Length 965mm(38in)
CG 30 - 35mm from the leading edge of the wing at the root
Power System: Detrum BM2815-1100KV brushless outrunner motor
Electronic Speed Control: TomCat Skylord-40A ESC 5A-BEC
Propeller 3-Blade Prop 9*6*3
Servo 6x 9g
Elevator Yes
Rudder Yes
Ailerons Yes
Flaps Yes
Landing Gear Fixed
EDF N/A
Floats N/A
Tx Requirement 6-Channel or above transmitter (not included)
Rx Requirement 6-Channel receiver (not included)
Li-Po Battery 11.1V 2200mAh 25C (not included)
Appr. Assembly Time 0.5 hour