-
Fokker E.III Eindecker WW1 Fighter Balsa Wood Pre-Built ARF 1580mm Wingspan RC Plane
$526.00
$318.92 -
F/A-18E 4S 64mm EDF Jet Royal Maces RC Plane PNP
$310.00
$182.92 -
A1 800mm/32'' EPO Electric RC Airplane PNP
$199.00
$108.99 -
Large 1200mm Dynam P-51D Mustang Ready-To-Fly Electric RC Airplane
$399.00
$319.97 -
VolantexRC Vector28 2.4Ghz Super High Speed Pool Racer RC Boat (795-1) Ready-To-Run
$135.00
$39.97 -
Bleriot XI Wingspan 1800mm ARF Pre-Built Balsawood Scale Airplane SCG34
$999.00
$552.92 -
Mini Cessna 200mm/8'' Indoor Electric RC Airplane Ready-To-Fly
$39.00
$15.95 -
VolantexRC Tumbler Auto-roll-back Pool Racer RC Boat (796-1) Ready-To-Run
$139.00
$59.97 -
TopRC Jet Star 800mm Wingspan RC Jet PNP Red
$259.00
$168.97 -
Cessna 170 G2 60E 86'' Night LED Maroon PNP Electric Airplane
$990.00
$462.92
Product Description
Introduction
Dynam SR-22 is a 1:12 scale of the SR-22, 4 seats Single-Engine composit airplane from 2000. The airplane has a modern and aerodynamic Looks. Dynam SR-22 is constructet by the strang materia EPO that can stand crashes. The model is equiptet by a powerfull brushless motor and 40A ESC to make the airplane powerfull with longer flight-time. The high Aspect-ratio wings makes the airplane very stable with good Glide-ratio. All servoes, receiver, Brushless Motor and ESC are preinstalled from the factory. All you need is to add a receiver and fly your model. The model is suitable for pilots who wants their first Low-Wing trainer to advanced pilots. The building-time is 45min
Specifications:
Model No. DY8936V2
Model Name SR22
Material EPO Foam
Wing Span 1400mm(55.1in)
Flying Weight 880g
Wing Loading 44g/dm²
Fuselage Length 965mm(38in)
CG 30 - 35mm from the leading edge of the wing at the root
Power System: Detrum BM2815-1100KV brushless outrunner motor
Electronic Speed Control: TomCat Skylord-40A ESC 5A-BEC
Propeller 3-Blade Prop 9*6*3
Servo 6x 9g
Elevator Yes
Rudder Yes
Ailerons Yes
Flaps Yes
Landing Gear Fixed
EDF N/A
Floats N/A
Tx Requirement 6-Channel or above transmitter (not included)
Rx Requirement 6-Channel receiver (not included)
Li-Po Battery 11.1V 2200mAh 25C (not included)
Appr. Assembly Time 0.5 hour