-
Volantex Ranger 2000 V757-8 2000mm Wingspan EPO FPV Aircraft RC Airplane PNP
$299.00
$156.99 -
Dynam PT-17 1300mm Wingspan EPO RC Plane PNP Blue
$329.00
$218.99 -
Dynam T-28 Trojan V2 1270mm EPO RC Plane With Retracts PNP Yellow
$319.00
$209.97 -
Velocity 1000mm (39.4in) Patrol Racing High Speed RC Plane PNP
$239.00
$129.99 -
Dynam Messerschmitt BF-110 59''/1500mm EPO Electric RC Plane Ready-To-Fly
$599.00
$409.97 -
Viper 64mm EDF RC Jet PNP Red
$305.00
$198.99 -
SlowPoke 1200mm RC Plane PNP
$302.00
$169.99 -
Dynam Turbo Jet V2 Twin 64mm EDF Jet PNP Yellow
$319.00
$226.97 -
Avios Albatross HU-16 V2 1620mm 63.7" US Coast Guard Flying Boat Water RC Plane PNP
$560.00
$345.92 -
Dynam A-10 Thunderbolt II V2 Twin 64mm EDF RC Jet with Retracts 1080mm Wingspan Ready-To-Fly
$429.00
$319.97
Product Description
Introduction
Dynam SR-22 is a 1:12 scale of the SR-22, 4 seats Single-Engine composit airplane from 2000. The airplane has a modern and aerodynamic Looks. Dynam SR-22 is constructet by the strang materia EPO that can stand crashes. The model is equiptet by a powerfull brushless motor and 40A ESC to make the airplane powerfull with longer flight-time. The high Aspect-ratio wings makes the airplane very stable with good Glide-ratio. All servoes, receiver, Brushless Motor and ESC are preinstalled from the factory. All you need is to add a receiver and fly your model. The model is suitable for pilots who wants their first Low-Wing trainer to advanced pilots. The building-time is 45min
Specifications:
Model No. DY8936V2
Model Name SR22
Material EPO Foam
Wing Span 1400mm(55.1in)
Flying Weight 880g
Wing Loading 44g/dm²
Fuselage Length 965mm(38in)
CG 30 - 35mm from the leading edge of the wing at the root
Power System: Detrum BM2815-1100KV brushless outrunner motor
Electronic Speed Control: TomCat Skylord-40A ESC 5A-BEC
Propeller 3-Blade Prop 9*6*3
Servo 6x 9g
Elevator Yes
Rudder Yes
Ailerons Yes
Flaps Yes
Landing Gear Fixed
EDF N/A
Floats N/A
Tx Requirement 6-Channel or above transmitter (not included)
Rx Requirement 6-Channel receiver (not included)
Li-Po Battery 11.1V 2200mAh 25C (not included)
Appr. Assembly Time 0.5 hour