-
Dynam Turbo Jet V2 Twin 64mm EDF Jet PNP Yellow
$319.00
$226.97 -
EX-Hobby Ranger600 Glider with Xpilot Stabilization System and One Key U-turn Function (761-2) Ready-To-Fly Out Of Box
$129.00
$99.97 -
Dynam F4U Corsair V2 50'' EPO Electric RC Airplane Warbird
$319.00
$201.99 -
VolanterRC FPVraptor V2 Tower UAV Trim Scheme 2M Unibody Pusher (757-V2) Eelctric RC Glider Kit Version
$159.00
$109.97 -
Dynam BF-109 50'' V2 EPO Electric RC Airplane PNP With Motor/ESC/Servos/Prop/Retracts Installed
$329.00
$209.99 -
Flycat 70mm 12-Blade 1042mm (41") Wingspan EDF RC Jet Plane PNP
$399.00
$259.92 -
F-18 Hornet V2 64mm EDF Jet RC Plane PNP
$336.00
$189.92 -
Tecnam-2010 1450MM (57'') Wingspan RC Plane PNP With Vector Stabilizer
$399.00
$245.92 -
Dynam Seawind 1220mm (48") Wingspan Electric RC Plane Ready-To-Fly
$399.00
$319.97 -
F-86 64mm 12 Blade EDF RC Jet PNP With Vector Stabilizer
$299.00
$199.92
Product Description
Introduction
Dynam SR-22 is a 1:12 scale of the SR-22, 4 seats Single-Engine composit airplane from 2000. The airplane has a modern and aerodynamic Looks. Dynam SR-22 is constructet by the strang materia EPO that can stand crashes. The model is equiptet by a powerfull brushless motor and 40A ESC to make the airplane powerfull with longer flight-time. The high Aspect-ratio wings makes the airplane very stable with good Glide-ratio. All servoes, receiver, Brushless Motor and ESC are preinstalled from the factory. All you need is to add a receiver and fly your model. The model is suitable for pilots who wants their first Low-Wing trainer to advanced pilots. The building-time is 45min
Specifications:
Model No. DY8936V2
Model Name SR22
Material EPO Foam
Wing Span 1400mm(55.1in)
Flying Weight 880g
Wing Loading 44g/dm²
Fuselage Length 965mm(38in)
CG 30 - 35mm from the leading edge of the wing at the root
Power System: Detrum BM2815-1100KV brushless outrunner motor
Electronic Speed Control: TomCat Skylord-40A ESC 5A-BEC
Propeller 3-Blade Prop 9*6*3
Servo 6x 9g
Elevator Yes
Rudder Yes
Ailerons Yes
Flaps Yes
Landing Gear Fixed
EDF N/A
Floats N/A
Tx Requirement 6-Channel or above transmitter (not included)
Rx Requirement 6-Channel receiver (not included)
Li-Po Battery 11.1V 2200mAh 25C (not included)
Appr. Assembly Time 0.5 hour