-
AF-Models Viper 64mm EDF RC Jet PNP Blue
$305.00
$175.97 -
Lanyu ASW28 2.6m/103'' Unibody Scale RC Glider (759-1) Ready-To-Fly
$399.00
$319.97 -
Dynam Cessna 182 50'' Electric RC Plane Ready-To-Fly
$399.00
$319.97 -
Dynam Sbach 342 Aerobatic RC Plane 1250mm PNP
$359.00
$255.97 -
Dynam BF-109 50'' V2 EPO Electric RC Airplane PNP With Motor/ESC/Servos/Prop/Retracts Installed
$329.00
$229.99 -
Dynam P-61 Black Widow 1.5m Twin Engine Electric RC Plane PNP G
$489.00
$351.99 -
VolantexRC Corsair F4U 4CH Warbird RC Airplane with Xpilot Stabilizer One-key Aerobatic RTF 761-8
$150.00
$80.97 -
Volantex Ranger 2400 5 Channel FPV Airplane With 2.4 Meter Wingspan And Multiple Camera Mounting Platform (757-9) PNP
$369.00
$189.97 -
Dynam Meteor Brushless 70mm EDF RC Jet RC Airplane 4-Ch RTF
$429.00
$299.97 -
Dynam Tiger Moth 1270mm EPO Electric RC Plane Ready-To-Fly
$399.00
$319.97
Product Description
The Messerchmitt ME-262 was developed by the Germans during the later part of WWII. It was the first jet fighter in the world and probably the most advanced of its time.
The streamlined fuselage and stunning performance has been beautifully recreated by Dynam. Engineered for speed and agility this plane is constructed of EPOFLEX foam. Twin composite 5 blade 70mm ducted fans supported by twin 60amp speed controllers easily propel this jet to adrenaline pumping speeds. Even better is that only a single 14.8v 4000mAh battery is required to support this monster of a power plant. The steerable nose wheel and worm drive retracts allow the landing gears to retract slowly providing that touch of realism. 9gram servos command the large control surfaces with authority. The control horns, ducted fans, and servos are pre installed which makes the plane simple and quick to build.
The scale color scheme is simply stunning and it presents as well in the air as it does taxing on the runway. Pilots will appreciate the unique silhouette it produces while in the sky. The aerodynamics of the ME 262 makes the plane look fast even when parked!
Please note: The Dynam retracts are not compatible with the Airtronics FHSS-1 radio system, they will work with their new FHSS-2 and FHSS-3 radio system.
The Messerchmitt ME-262 was developed by the Germans during the later part of WWII. It was the first operational jet fighter in the world.
Dynam replicates the full size to bring you a scale EPO foam recreation of the Me262 PRO 6S. Twin 70mm ducted fans supported by twin 60A speed controllers easily propel this jet to adrenaline pumping speeds. Even better is that only a single 22.2V 5000mAh battery is required to support this monster of a power plant. The steerable nose wheel and worm drive retracts allow the landing gears to retract slowly providing that touch of realism. The control horns, ducted fans, and servos are pre-installed which makes the plane simple and quick to build.
Key Features:
- Realistic scale features including bright gray camo paint scheme and decals, hand painted pilot figure, and molded panel lines
- 1500mm wingspan for great ascensional force and the ability to climb to high altitudes
- Electronic retractable landing gear
- Powerful 70mm electronic ducted fan units
- Large hatch to the battery and receiver area
- Worm drive retracts
- Large control surfaces
- Stiff wing
- Steerable nose wheel
- LED navigation lights
- Pre-installed control horns
Technical Specifications:
Material: EPO Foam
Wing Span: 1500mm (59in)
Flying Weight: 2650g (93.5oz)
Wing Loading: 70.9g/dm2
Fuselage Length: 1284mm (50.6in)
CG: 115 - 120mm from the leading edge at the wing root
Motor: Tomcat TC2826-KV2200
ESC: TC Skylord 80A ESC X2Pcs
Servo: 9g X 8pcs
Elevator: Yes
Rudder: Yes
Ailerons: Yes
Flaps: Yes
Landing Gear: E retract
EDF: 12-blade, 70mm * 2
Tx Requirement: 6-Channel or above transmitter (not included)
Rx Requirement: 6-Channel receiver (not included)
Li-Po Battery: 22.2V 5200mAh 30C (not included)
![](http://www.generalhobby.com/images/allmodels2/me-262-v3-dynam-1.jpg)
![](http://www.generalhobby.com/images/allmodels2/me-262-v3-dynam-2.jpg)
![](http://www.generalhobby.com/images/allmodels2/me-262-v3-dynam-3.jpg)
![](http://www.generalhobby.com/images/allmodels2/me-262-v3-dynam-5.jpg)
The streamlined fuselage and stunning performance has been beautifully recreated by Dynam. Engineered for speed and agility this plane is constructed of EPOFLEX foam. Twin composite 5 blade 70mm ducted fans supported by twin 60amp speed controllers easily propel this jet to adrenaline pumping speeds. Even better is that only a single 14.8v 4000mAh battery is required to support this monster of a power plant. The steerable nose wheel and worm drive retracts allow the landing gears to retract slowly providing that touch of realism. 9gram servos command the large control surfaces with authority. The control horns, ducted fans, and servos are pre installed which makes the plane simple and quick to build.
The scale color scheme is simply stunning and it presents as well in the air as it does taxing on the runway. Pilots will appreciate the unique silhouette it produces while in the sky. The aerodynamics of the ME 262 makes the plane look fast even when parked!
Please note: The Dynam retracts are not compatible with the Airtronics FHSS-1 radio system, they will work with their new FHSS-2 and FHSS-3 radio system.
The Messerchmitt ME-262 was developed by the Germans during the later part of WWII. It was the first operational jet fighter in the world.
Dynam replicates the full size to bring you a scale EPO foam recreation of the Me262 PRO 6S. Twin 70mm ducted fans supported by twin 60A speed controllers easily propel this jet to adrenaline pumping speeds. Even better is that only a single 22.2V 5000mAh battery is required to support this monster of a power plant. The steerable nose wheel and worm drive retracts allow the landing gears to retract slowly providing that touch of realism. The control horns, ducted fans, and servos are pre-installed which makes the plane simple and quick to build.
Key Features:
- Realistic scale features including bright gray camo paint scheme and decals, hand painted pilot figure, and molded panel lines
- 1500mm wingspan for great ascensional force and the ability to climb to high altitudes
- Electronic retractable landing gear
- Powerful 70mm electronic ducted fan units
- Large hatch to the battery and receiver area
- Worm drive retracts
- Large control surfaces
- Stiff wing
- Steerable nose wheel
- LED navigation lights
- Pre-installed control horns
Technical Specifications:
Material: EPO Foam
Wing Span: 1500mm (59in)
Flying Weight: 2650g (93.5oz)
Wing Loading: 70.9g/dm2
Fuselage Length: 1284mm (50.6in)
CG: 115 - 120mm from the leading edge at the wing root
Motor: Tomcat TC2826-KV2200
ESC: TC Skylord 80A ESC X2Pcs
Servo: 9g X 8pcs
Elevator: Yes
Rudder: Yes
Ailerons: Yes
Flaps: Yes
Landing Gear: E retract
EDF: 12-blade, 70mm * 2
Tx Requirement: 6-Channel or above transmitter (not included)
Rx Requirement: 6-Channel receiver (not included)
Li-Po Battery: 22.2V 5200mAh 30C (not included)
![](http://www.generalhobby.com/images/allmodels2/me-262-v3-dynam-1.jpg)
![](http://www.generalhobby.com/images/allmodels2/me-262-v3-dynam-2.jpg)
![](http://www.generalhobby.com/images/allmodels2/me-262-v3-dynam-3.jpg)
![](http://www.generalhobby.com/images/allmodels2/me-262-v3-dynam-5.jpg)