-
Dynam DHC-2 Beaver 1500mm (59") Wingspan Electric RC Plane PNP New Version V2
$359.00
$223.97 -
Dynam SR22 1400mm V2 RC Plane with Flaps PNP W
$359.00
$175.99 -
Dynam Cessna 310 Grand Cruiser V2 Electric RC Airplane PNP 1280mm Wingspan With Flaps Blue
$359.00
$228.97 -
F4U Corsair 50'' EPO Electric RC Airplane Warbird Ready-To-Fly
$359.00
$319.97 -
Dynam Devil 3D Sport Aerobatic Bi-Plane EPO Electric RC Plane Ready-To-Fly
$399.00
$319.97 -
Cessna 182 1400mm EPO Electric RC Plane Ready-To-Fly
$399.00
$229.97 -
TopRC Jet Star 800mm Wingspan RC Jet PNP Blue
$259.00
$139.97 -
TopRC FW-190 1200mm/47in EPO Electric RC Airplane PNP
$329.00
$216.99 -
PBY Catalina 2.4G Brushless/LIPO Electric RC Airplane PNP
$359.00
$238.97 -
Dynam Sbach 342 Aerobatic RC Plane 1250mm Ready-To-Fly
$399.00
$319.97
Product Description
Dynam RC has recreated the Hawker Tempest in a beautiful EPO foam
construction. The wingspan stretches 50 inches while the fuselage stretches 40
inches. The Tempest is equipped with Dynam's 600kv brushless outrunner motor and
a 40amp brushless electronic speed controller providing great power to weight
ratio. The control surfaces come alive through the operation of pre-installed 9
gram servos for the aileron, rudder, and elevator. The Tempest is also equipped
with retractable servo less landing gear.
This almost ready to fly version comes out of the box with all the electronics installed. You will need a minimum 5 channel radio system and a 14.8v 2200mah battery to power and control the electronics. Minimum assembly is also required to get the plane ready for flight.
Please note: The Dynam retracts are not compatible with the Airtronics FHSS-1 radio system, they will work with their new FHSS-2 and FHSS-3 radio system.
Specifications:
Wingspan: 1250mm (49.2in)
Overall Length: 1018mm (40in)
Wing Loading: 49.5g/d㎡
Servo: 9gx4pcs
Speed Controller: 40A Brushless
Motor Size: BM3720A-KV600 Brushless Outrunner
Battery: 14.8V 2200mAh Li-Po, 25C
5 channel Minimum Radio System
Lipo Charger capable of 4 cell charging
AA batteries for transmitter
This almost ready to fly version comes out of the box with all the electronics installed. You will need a minimum 5 channel radio system and a 14.8v 2200mah battery to power and control the electronics. Minimum assembly is also required to get the plane ready for flight.
Please note: The Dynam retracts are not compatible with the Airtronics FHSS-1 radio system, they will work with their new FHSS-2 and FHSS-3 radio system.
Specifications:
Wingspan: 1250mm (49.2in)
Overall Length: 1018mm (40in)
Wing Loading: 49.5g/d㎡
Servo: 9gx4pcs
Speed Controller: 40A Brushless
Motor Size: BM3720A-KV600 Brushless Outrunner
Battery: 14.8V 2200mAh Li-Po, 25C
5 channel Minimum Radio System
Lipo Charger capable of 4 cell charging
AA batteries for transmitter