-
VolanterRC FPVraptor V2 Tower UAV Trim Scheme 2M Unibody Pusher (757-V2) Eelctric RC Glider Kit Version
$159.00
$109.97 -
S.E.5A SE5a 1.62M(63.8")Balsa Wood Pre-Built ARF RC Airplane
$529.00
$329.99 -
Fokker E.III Eindecker WW1 Fighter Balsa Wood Pre-Built ARF 1580mm Wingspan RC Plane
$526.00
$322.99 -
Cessna 170 G2 86'' PNP Electric Airplane
$950.00
$431.92 -
Extra 330 1420mm Wingspan 3D Aerobatic RC Plane PNP Built with Strong EPO Materials
$482.00
$299.99 -
F-86 Sabre 90mm EDF RC Jet Kit Version
$350.00
$189.97 -
Starmax F/A-18C Hornet Jolly Rogers 70mm Electric EDF RC Jet Ready-To-Fly
$399.00
$239.92 -
Condor Magic EVO4 3M/118'' Electric RC Glider
$560.00
$389.97 -
LX F4F Wildcat 47''/1200mm EPO Electric RC Airplane PNP
$499.00
$273.99 -
Dynam Scout 980mm Electric RC Plane Ready-To-Fly
$339.00
$269.97
Product Description
Dynam RC has recreated the Hawker Tempest in a beautiful EPO foam
construction. The wingspan stretches 50 inches while the fuselage stretches 40
inches. The Tempest is equipped with Dynam's 600kv brushless outrunner motor and
a 40amp brushless electronic speed controller providing great power to weight
ratio. The control surfaces come alive through the operation of pre-installed 9
gram servos for the aileron, rudder, and elevator. The Tempest is also equipped
with retractable servo less landing gear.
This almost ready to fly version comes out of the box with all the electronics installed. You will need a minimum 5 channel radio system and a 14.8v 2200mah battery to power and control the electronics. Minimum assembly is also required to get the plane ready for flight.
Please note: The Dynam retracts are not compatible with the Airtronics FHSS-1 radio system, they will work with their new FHSS-2 and FHSS-3 radio system.
Specifications:
Wingspan: 1250mm (49.2in)
Overall Length: 1018mm (40in)
Wing Loading: 49.5g/d㎡
Servo: 9gx4pcs
Speed Controller: 40A Brushless
Motor Size: BM3720A-KV600 Brushless Outrunner
Battery: 14.8V 2200mAh Li-Po, 25C
5 channel Minimum Radio System
Lipo Charger capable of 4 cell charging
AA batteries for transmitter
This almost ready to fly version comes out of the box with all the electronics installed. You will need a minimum 5 channel radio system and a 14.8v 2200mah battery to power and control the electronics. Minimum assembly is also required to get the plane ready for flight.
Please note: The Dynam retracts are not compatible with the Airtronics FHSS-1 radio system, they will work with their new FHSS-2 and FHSS-3 radio system.
Specifications:
Wingspan: 1250mm (49.2in)
Overall Length: 1018mm (40in)
Wing Loading: 49.5g/d㎡
Servo: 9gx4pcs
Speed Controller: 40A Brushless
Motor Size: BM3720A-KV600 Brushless Outrunner
Battery: 14.8V 2200mAh Li-Po, 25C
5 channel Minimum Radio System
Lipo Charger capable of 4 cell charging
AA batteries for transmitter
![](http://www.generalhobby.com/images/allmodels2/tempest-dynam-2.jpg)
![](http://www.generalhobby.com/images/allmodels2/tempest-dynam-3.jpg)
![](http://www.generalhobby.com/images/allmodels2/tempest-dynam-5.jpg)
![](http://www.generalhobby.com/images/allmodels2/tempest-dynam-6.jpg)
![](http://www.generalhobby.com/images/allmodels2/tempest-dynam-8.jpg)
![](http://www.generalhobby.com/images/allmodels2/tempest-dynam-9.jpg)
![](http://www.generalhobby.com/images/allmodels2/tempest-dynam-10.jpg)