-
PBY Catalina 2.4G Brushless/LIPO Electric RC Airplane PNP Blue
$359.00 -
EX-Hobby Ranger600 Glider with Xpilot Stabilization System and One Key U-turn Function (761-2) Ready-To-Fly Out Of Box
$129.00
$99.97 -
Large 1200mm Dynam P-51D Mustang Ready-To-Fly Electric RC Airplane
$399.00
$319.97 -
TopRC FW-190 1200mm/47in EPO Electric RC Airplane PNP
$329.00
$199.92 -
Sky Surfer 1400mm/55'' EPO Electric RC Airplane PNP
$199.00 -
F3A 50E A4 55'' Balsa Electric RC Plane
$520.00
$281.97 -
DW Hobby 39.4" Airplane Deperdussin Monocoque 1.0M Balsa Wood RC Plane Model Kit
$290.00
$152.97 -
Dynam Sbach 342 Aerobatic RC Plane 1250mm PNP
$359.00
$255.97 -
Dynam Messerschmitt BF-110 59''/1500mm EPO Electric RC Plane V3 PNP
$499.00
$359.97 -
SBach 342 50E 55'' Thunderbolt Aerobatic RC Airplane A
$399.00
$219.99
Product Description
Dynam RC has recreated the Hawker Tempest in a beautiful EPO foam
construction. The wingspan stretches 50 inches while the fuselage stretches 40
inches. The Tempest is equipped with Dynam's 600kv brushless outrunner motor and
a 40amp brushless electronic speed controller providing great power to weight
ratio. The control surfaces come alive through the operation of pre-installed 9
gram servos for the aileron, rudder, and elevator. The Tempest is also equipped
with retractable servo less landing gear.
This almost ready to fly version comes out of the box with all the electronics installed. You will need a minimum 5 channel radio system and a 14.8v 2200mah battery to power and control the electronics. Minimum assembly is also required to get the plane ready for flight.
Please note: The Dynam retracts are not compatible with the Airtronics FHSS-1 radio system, they will work with their new FHSS-2 and FHSS-3 radio system.
Specifications:
Wingspan: 1250mm (49.2in)
Overall Length: 1018mm (40in)
Wing Loading: 49.5g/d㎡
Servo: 9gx4pcs
Speed Controller: 40A Brushless
Motor Size: BM3720A-KV600 Brushless Outrunner
Battery: 14.8V 2200mAh Li-Po, 25C
5 channel Minimum Radio System
Lipo Charger capable of 4 cell charging
AA batteries for transmitter
This almost ready to fly version comes out of the box with all the electronics installed. You will need a minimum 5 channel radio system and a 14.8v 2200mah battery to power and control the electronics. Minimum assembly is also required to get the plane ready for flight.
Please note: The Dynam retracts are not compatible with the Airtronics FHSS-1 radio system, they will work with their new FHSS-2 and FHSS-3 radio system.
Specifications:
Wingspan: 1250mm (49.2in)
Overall Length: 1018mm (40in)
Wing Loading: 49.5g/d㎡
Servo: 9gx4pcs
Speed Controller: 40A Brushless
Motor Size: BM3720A-KV600 Brushless Outrunner
Battery: 14.8V 2200mAh Li-Po, 25C
5 channel Minimum Radio System
Lipo Charger capable of 4 cell charging
AA batteries for transmitter