-
Cessna 43'' Durable RC Plane Ready-To-Fly
$329.00
$229.97 -
DW Hobby 61" Fokker DR1 Triplane Laser Cut Balsawood RC Airplane Model Kit
$506.00
$259.97 -
Dynam Tiger Moth 1270mm EPO Electric RC Plane Ready-To-Fly
$399.00
$319.97 -
F6F Hellcat 50'' 1270mm EPO Electric RC Airplane Ready-To-Fly
$399.00
$309.97 -
Dynam Cessna 188 Crop Duster 59''/1500mm Electric RC Plane Orange Ready-To-Fly
$429.00
$299.97 -
Dynam Cessna 310 Grand Cruiser V2 Electric RC Airplane PNP 1280mm Wingspan With Flaps Red
$359.00
$226.99 -
LX-Model F-117 Nighthawk Stealth Fighter 64mm EDF Electric RC Jet Airplane PNP
$269.00
$151.97 -
Dynam C-47 Transporter V2 Brushless RC Airplane PNP
$339.00
$243.97 -
LX F4 Phantom Twin 70mm EDF RC Jet Grey With Retracts Kit Version
$390.00
$168.99 -
Dynam Albatross RC Bi-Plane 1270mm Electric RC Plane Ready-To-Fly
$429.00
$319.99
Product Description
Dynam RC has recreated the Hawker Tempest in a beautiful EPO foam
construction. The wingspan stretches 50 inches while the fuselage stretches 40
inches. The Tempest is equipped with Dynam's 600kv brushless outrunner motor and
a 40amp brushless electronic speed controller providing great power to weight
ratio. The control surfaces come alive through the operation of pre-installed 9
gram servos for the aileron, rudder, and elevator. The Tempest is also equipped
with retractable servo less landing gear.
This almost ready to fly version comes out of the box with all the electronics installed. You will need a minimum 5 channel radio system and a 14.8v 2200mah battery to power and control the electronics. Minimum assembly is also required to get the plane ready for flight.
FEATURES:
Realistic scale features including WWII RAF paint scheme, hand painted pilot figure, gun turrets, and molded panel lines
Servoless electronic retractable landing gear
Powerful BM3720A-KV600 Brushless Outrunner motor
LED navigation lights add scale realism and help make the plane more visible during dawn and dusk flights
Scale 3-blade propeller
SPECIFICATIONS:
AGE LEVEL: 14 AND UP SKILL LEVEL : INTERMEDIATE BUILD TIME : 3+ HOURS
Wingspan: 1250mm / 49in
Length: 1018mm / 40in
Flying Weight: 1500g / 53oz
CG (Center of Gravity): 55 - 60mm from the leading edge at the wing root (The manual calls for a CG 55mm to 60mm from the leading edge. It's found that 70mm to 75mm a much better CG.)
Power System: BM3720A-KV600 Brushless Outrunner Motor
Electronic Speed Control: 40A Brushless with T connector
Propeller: 3-Blade Prop
Servos: 4x 9g standard
Landing Gear: Retractable
Required Battery: 4S 14.8V 2200mAh 25C LiPo (not included)
Required Radio: 5 Channel (not included)
Ailerons: Yes
Elevator: Yes
Rudder: Yes
Flaps: No
Lights: Yes
Hinge Type: Foam
Material: EPO Foam
Skill Level: Intermediate
Build Time: 2-3 Hours
This almost ready to fly version comes out of the box with all the electronics installed. You will need a minimum 5 channel radio system and a 14.8v 2200mah battery to power and control the electronics. Minimum assembly is also required to get the plane ready for flight.
FEATURES:
Realistic scale features including WWII RAF paint scheme, hand painted pilot figure, gun turrets, and molded panel lines
Servoless electronic retractable landing gear
Powerful BM3720A-KV600 Brushless Outrunner motor
LED navigation lights add scale realism and help make the plane more visible during dawn and dusk flights
Scale 3-blade propeller
SPECIFICATIONS:
AGE LEVEL: 14 AND UP SKILL LEVEL : INTERMEDIATE BUILD TIME : 3+ HOURS
Wingspan: 1250mm / 49in
Length: 1018mm / 40in
Flying Weight: 1500g / 53oz
CG (Center of Gravity): 55 - 60mm from the leading edge at the wing root (The manual calls for a CG 55mm to 60mm from the leading edge. It's found that 70mm to 75mm a much better CG.)
Power System: BM3720A-KV600 Brushless Outrunner Motor
Electronic Speed Control: 40A Brushless with T connector
Propeller: 3-Blade Prop
Servos: 4x 9g standard
Landing Gear: Retractable
Required Battery: 4S 14.8V 2200mAh 25C LiPo (not included)
Required Radio: 5 Channel (not included)
Ailerons: Yes
Elevator: Yes
Rudder: Yes
Flaps: No
Lights: Yes
Hinge Type: Foam
Material: EPO Foam
Skill Level: Intermediate
Build Time: 2-3 Hours
![](http://www.generalhobby.com/images/allmodels2/tempest-dynam-2.jpg)
![](http://www.generalhobby.com/images/allmodels2/tempest-dynam-3.jpg)
![](http://www.generalhobby.com/images/allmodels2/tempest-dynam-5.jpg)
![](http://www.generalhobby.com/images/allmodels2/tempest-dynam-6.jpg)
![](http://www.generalhobby.com/images/allmodels2/tempest-dynam-8.jpg)
![](http://www.generalhobby.com/images/allmodels2/tempest-dynam-9.jpg)
![](http://www.generalhobby.com/images/allmodels2/tempest-dynam-10.jpg)