-
VolanterRC FPVraptor V2 Tower UAV Trim Scheme 2M Unibody Pusher (757-V2) Eelctric RC Glider Kit Version
$159.00
$109.97 -
Dynam WACO (YNF-5D) 1270mm EPO RC Electric Plane PNP
$309.00
$225.99 -
P-51 Mustang 30'' RC Plane PNP
$189.00
$79.99 -
Dynam PT-17 1300mm Wingspan EPO RC Plane PNP Blue
$329.00
$239.99 -
VolantexRC Tumbler Auto-roll-back Pool Racer RC Boat (796-1) Ready-To-Run
$139.00
$49.97 -
Skyline Edge 540 30CC 70''/1778mm Aerobatic RC Airplane V3 with All Carbon Fiber Construction
$650.00
$397.98 -
Volantex P-51 Mustang 30''/750MM (768-1) 750MM Ready-To-Fly RC Airplane
$299.00
$189.99 -
TopRC Cessna 182 965mm Wingspan RC Plane PNP
$199.00
$97.99 -
Dynam Spitfire 1200mm/47'' EPO Electric RC Airplane PNP
$319.00
$239.97 -
F3A 950mm Wingspan EPO RC Plane PNP Red
$199.00
$99.97
Product Description
Features:
Fuselage with preinstalled servos, Y-harness, pushrods, motor and ESC
Wing halves with preinstalled servos, pushrods and ailerons
Preassembled landing gear
Fiberglass wing tube
Horizontal stabilizer with preinstalled carbon fiber reinforcement
Vertical stabilizer with preinstalled tailwheel
Spare propeller
Fully decorated pilot figure and adhesive
Full hardware package with phillips screwdriver, metric allen wrench and contact cement
Pressure sensitive decals
Specifications:
Wingspan: 50in(1270mm)
Overall Length: 45.8in(980mm)
Wing Loading: 42.2g/sq dm
Flying Weight: 2.8lb(1250g)
Already Installed:
Motor: BM3715A-KV900 Brushless Outrunner
Speed Controller: 40A ESC
Servo: 9g x 4
Still Required:
Radio: 5-ch (included)
3S 2200mAh LiPO (included)
![](http://www.generalhobby.com/images/allmodels2/dynam-gee-bee-1.JPG)
![](http://www.generalhobby.com/images/allmodels2/dynam-gee-bee-2.JPG)
Fuselage with preinstalled servos, Y-harness, pushrods, motor and ESC
Wing halves with preinstalled servos, pushrods and ailerons
Preassembled landing gear
Fiberglass wing tube
Horizontal stabilizer with preinstalled carbon fiber reinforcement
Vertical stabilizer with preinstalled tailwheel
Spare propeller
Fully decorated pilot figure and adhesive
Full hardware package with phillips screwdriver, metric allen wrench and contact cement
Pressure sensitive decals
Specifications:
Wingspan: 50in(1270mm)
Overall Length: 45.8in(980mm)
Wing Loading: 42.2g/sq dm
Flying Weight: 2.8lb(1250g)
Already Installed:
Motor: BM3715A-KV900 Brushless Outrunner
Speed Controller: 40A ESC
Servo: 9g x 4
Still Required:
Radio: 5-ch (included)
3S 2200mAh LiPO (included)