-
LX F4F Wildcat 47''/1200mm EPO Electric RC Airplane Ready-To-Fly
$659.00
$389.97 -
PT-17 Stearman 1600mm Pre-Built Balsa ARF RC Plane (SCG35)
$950.00
$522.92 -
Twin Otter DHC-6 1800mm/70.9'' with Floats RC Plane PNP
$720.00
$419.99 -
TopRC P-51D Mustang Yellow 750mm/30.00in EPO Electric RC Airplane PNP
$189.00
$97.99 -
F8F-1 Bearcat 1200mm (47.2in) Wingspan 4S PNP WW2 Warbird RC Plane
$359.00
$229.99 -
TopRC Jet Star 800mm Wingspan RC Jet PNP Red
$259.00
$168.97 -
BAE Hawk 90mm EDF Electric RC Jet Kit Version
$350.00
$189.97 -
Dynam Cessna 188 Crop Duster 59''/1500mm PNP Electric RC Plane Blue
$319.00
$176.97 -
VolantexRC Vector 40(cm) High speed racing boat ABS Unibody (797-1) Ready-To-Run Brushed Version
$139.00
$65.98 -
LX L-20 1280mm Wingspan Electric RC Plane
$288.00
$166.97
Product Description
Features:
Fuselage with preinstalled servos, Y-harness, pushrods, motor and ESC
Wing halves with preinstalled servos, pushrods and ailerons
Preassembled landing gear
Fiberglass wing tube
Horizontal stabilizer with preinstalled carbon fiber reinforcement
Vertical stabilizer with preinstalled tailwheel
Spare propeller
Fully decorated pilot figure and adhesive
Full hardware package with phillips screwdriver, metric allen wrench and contact cement
Pressure sensitive decals
Specifications:
Wingspan: 50in(1270mm)
Overall Length: 45.8in(980mm)
Wing Loading: 42.2g/sq dm
Flying Weight: 2.8lb(1250g)
Already Installed:
Motor: BM3715A-KV900 Brushless Outrunner
Speed Controller: 40A ESC
Servo: 9g x 4
Still Required:
Radio: 5-ch (included)
3S 2200mAh LiPO (included)
![](http://www.generalhobby.com/images/allmodels2/dynam-gee-bee-1.JPG)
![](http://www.generalhobby.com/images/allmodels2/dynam-gee-bee-2.JPG)
Fuselage with preinstalled servos, Y-harness, pushrods, motor and ESC
Wing halves with preinstalled servos, pushrods and ailerons
Preassembled landing gear
Fiberglass wing tube
Horizontal stabilizer with preinstalled carbon fiber reinforcement
Vertical stabilizer with preinstalled tailwheel
Spare propeller
Fully decorated pilot figure and adhesive
Full hardware package with phillips screwdriver, metric allen wrench and contact cement
Pressure sensitive decals
Specifications:
Wingspan: 50in(1270mm)
Overall Length: 45.8in(980mm)
Wing Loading: 42.2g/sq dm
Flying Weight: 2.8lb(1250g)
Already Installed:
Motor: BM3715A-KV900 Brushless Outrunner
Speed Controller: 40A ESC
Servo: 9g x 4
Still Required:
Radio: 5-ch (included)
3S 2200mAh LiPO (included)