-
VolantexRC Tumbler Auto-roll-back Pool Racer RC Boat (796-1) Ready-To-Run
$139.00
$49.97 -
Z51 Predator 660mm Wingspan 2.4G 2CH EPP DIY Glider RC Airplane RTF Built-in Gyro
$139.00
$89.97 -
Lanyu ASW28 2.6m/103'' Unibody Scale RC Glider (759-1) Ready-To-Fly
$399.00
$319.97 -
Volantexrc Phoenix S 742-7 4 Channel 1600mm Wingspan EPO RC Airplane with Streamline ABS Plastic Fuselage PNP
$199.00
$96.91 -
Dynam Devil 3D Sport Aerobatic Bi-Plane EPO Electric RC Plane PNP
$319.00
$258.97 -
PBY Catalina 2.4G Brushless/LIPO Electric RC Airplane PNP Blue
$359.00 -
Dynam Primo 1450mm Wingspan RC Airplane Ready-To-Fly
$399.00
$299.97 -
Dynam Tiger Moth 1270mm EPO Electric RC Plane PNP
$309.00
$205.99 -
Dynam P-61 Black Widow 1.5m Twin Engine Electric RC Plane PNP
$489.00
$358.97 -
LX F4 Phantom Twin 70mm PNP EDF RC Jet Grey With Retracts
$499.00
$389.97
Product Description
Features:
Fuselage with preinstalled servos, Y-harness, pushrods, motor and ESC
Wing halves with preinstalled servos, pushrods and ailerons
Preassembled landing gear
Fiberglass wing tube
Horizontal stabilizer with preinstalled carbon fiber reinforcement
Vertical stabilizer with preinstalled tailwheel
Spare propeller
Fully decorated pilot figure and adhesive
Full hardware package with phillips screwdriver, metric allen wrench and contact cement
Pressure sensitive decals
Specifications:
Wingspan: 50in(1270mm)
Overall Length: 45.8in(980mm)
Wing Loading: 42.2g/sq dm
Flying Weight: 2.8lb(1250g)
Already Installed:
Motor: BM3715A-KV900 Brushless Outrunner
Speed Controller: 40A Brushless with T connector
Servo: 9g x 4
Still Required:
Your own transmitter and receiver.
3S 2200mAh LiPO
Fuselage with preinstalled servos, Y-harness, pushrods, motor and ESC
Wing halves with preinstalled servos, pushrods and ailerons
Preassembled landing gear
Fiberglass wing tube
Horizontal stabilizer with preinstalled carbon fiber reinforcement
Vertical stabilizer with preinstalled tailwheel
Spare propeller
Fully decorated pilot figure and adhesive
Full hardware package with phillips screwdriver, metric allen wrench and contact cement
Pressure sensitive decals
Specifications:
Wingspan: 50in(1270mm)
Overall Length: 45.8in(980mm)
Wing Loading: 42.2g/sq dm
Flying Weight: 2.8lb(1250g)
Already Installed:
Motor: BM3715A-KV900 Brushless Outrunner
Speed Controller: 40A Brushless with T connector
Servo: 9g x 4
Still Required:
Your own transmitter and receiver.
3S 2200mAh LiPO