-
Dynam WACO (YNF-5D) 1270mm EPO RC Electric Plane PNP
$309.00
$225.99 -
AT-6 Texan 5-CH 2.4Ghz 1370mm Electric R/C RC Airplane Plane Ready To Fly
$399.92
$299.97 -
Dynam Albatross RC Bi-Plane 1270mm Electric RC Plane PNP
$319.00
$248.99 -
Dynam F6F Hellcat V2 50'' 1270mm EPO Electric RC Airplane Ready-ToFly
$459.00
$319.97 -
TopRC Hawker Hurricane 750mm/30'' EPO Electric RC Airplane PNP Green
$189.00
$88.97 -
VolantexRC Tumbler Auto-roll-back Pool Racer RC Boat (796-1) Ready-To-Run
$139.00
$49.97 -
2.4Ghz 4-CH 64mm EDF F-15 Remote Control Jet w/ Brushless Motor/ESC/Lipo 100% RTF Grey
$369.00
$239.97 -
TopRC P-51D Mustang 750mm/30.00in EPO Electric RC Airplane Ready-To-Fly Blue
$289.00
$199.97 -
Dynam Scout 980mm Electric RC Plane Ready-To-Fly
$339.00
$269.97 -
VolantexRC Vector 40(cm) High speed racing boat ABS Unibody (797-1) Ready-To-Run Brushed Version
$139.00
$55.97
Product Description
Features:
Fuselage with preinstalled servos, Y-harness, pushrods, motor and ESC
Wing halves with preinstalled servos, pushrods and ailerons
Preassembled landing gear
Fiberglass wing tube
Horizontal stabilizer with preinstalled carbon fiber reinforcement
Vertical stabilizer with preinstalled tailwheel
Spare propeller
Fully decorated pilot figure and adhesive
Full hardware package with phillips screwdriver, metric allen wrench and contact cement
Pressure sensitive decals
Specifications:
Wingspan: 50in(1270mm)
Overall Length: 45.8in(980mm)
Wing Loading: 42.2g/sq dm
Flying Weight: 2.8lb(1250g)
Already Installed:
Motor: BM3715A-KV900 Brushless Outrunner
Speed Controller: 40A Brushless with T connector
Servo: 9g x 4
Still Required:
Your own transmitter and receiver.
3S 2200mAh LiPO
![](http://www.generalhobby.com/images/allmodels2/dynam-gee-bee-1.JPG)
![](http://www.generalhobby.com/images/allmodels2/dynam-gee-bee-2.JPG)
Fuselage with preinstalled servos, Y-harness, pushrods, motor and ESC
Wing halves with preinstalled servos, pushrods and ailerons
Preassembled landing gear
Fiberglass wing tube
Horizontal stabilizer with preinstalled carbon fiber reinforcement
Vertical stabilizer with preinstalled tailwheel
Spare propeller
Fully decorated pilot figure and adhesive
Full hardware package with phillips screwdriver, metric allen wrench and contact cement
Pressure sensitive decals
Specifications:
Wingspan: 50in(1270mm)
Overall Length: 45.8in(980mm)
Wing Loading: 42.2g/sq dm
Flying Weight: 2.8lb(1250g)
Already Installed:
Motor: BM3715A-KV900 Brushless Outrunner
Speed Controller: 40A Brushless with T connector
Servo: 9g x 4
Still Required:
Your own transmitter and receiver.
3S 2200mAh LiPO