-
Dynam T-28 Trojan 1270mm EPO RC Plane With Retracts Ready-To-Fly
$399.00
$319.97 -
Hawker Hunter 90mm EDF RC Jet Kit Verison
$350.00
$149.97 -
TopRC P-51D Mustang Yellow 750mm/30.00in EPO Electric RC Airplane PNP
$189.00
$97.99 -
LX SU-47 Berkut Twin 70mm EDF 360 Degree RC Jet With Retracts Kit Version
$259.00
$169.99 -
VolantexRC Vector28 2.4Ghz Super High Speed Pool Racer RC Boat (795-1) Ready-To-Run
$135.00
$39.97 -
LX F4 Phantom Twin 70mm PNP EDF RC Jet Grey With Retracts
$499.00
$389.97 -
Dynam Tiger Moth 1270mm EPO Electric RC Plane PNP
$309.00
$202.99 -
A-10 Thunderbolt II Twin 50mm EDF Jet PNP
$299.00
$189.92 -
EX-Hobby Ranger600 Glider with Xpilot Stabilization System and One Key U-turn Function (761-2) Ready-To-Fly Out Of Box
$129.00
$99.97 -
Dynam A-10 Thunderbolt II V2 Twin 64mm EDF RC Jet with Retracts 1080mm Wingspan Ready-To-Fly
$429.00
$319.97
Product Description
Features:
Fuselage with preinstalled servos, Y-harness, pushrods, motor and ESC
Wing halves with preinstalled servos, pushrods and ailerons
Preassembled landing gear
Fiberglass wing tube
Horizontal stabilizer with preinstalled carbon fiber reinforcement
Vertical stabilizer with preinstalled tailwheel
Spare propeller
Fully decorated pilot figure and adhesive
Full hardware package with phillips screwdriver, metric allen wrench and contact cement
Pressure sensitive decals
Specifications:
Wingspan: 50in(1270mm)
Overall Length: 45.8in(980mm)
Wing Loading: 42.2g/sq dm
Flying Weight: 2.8lb(1250g)
Already Installed:
Motor: BM3715A-KV900 Brushless Outrunner
Speed Controller: 40A Brushless with T connector
Servo: 9g x 4
Still Required:
Your own transmitter and receiver.
3S 2200mAh LiPO
![](http://www.generalhobby.com/images/allmodels2/dynam-gee-bee-1.JPG)
![](http://www.generalhobby.com/images/allmodels2/dynam-gee-bee-2.JPG)
Fuselage with preinstalled servos, Y-harness, pushrods, motor and ESC
Wing halves with preinstalled servos, pushrods and ailerons
Preassembled landing gear
Fiberglass wing tube
Horizontal stabilizer with preinstalled carbon fiber reinforcement
Vertical stabilizer with preinstalled tailwheel
Spare propeller
Fully decorated pilot figure and adhesive
Full hardware package with phillips screwdriver, metric allen wrench and contact cement
Pressure sensitive decals
Specifications:
Wingspan: 50in(1270mm)
Overall Length: 45.8in(980mm)
Wing Loading: 42.2g/sq dm
Flying Weight: 2.8lb(1250g)
Already Installed:
Motor: BM3715A-KV900 Brushless Outrunner
Speed Controller: 40A Brushless with T connector
Servo: 9g x 4
Still Required:
Your own transmitter and receiver.
3S 2200mAh LiPO