-
F-86 Sabre 90mm EDF RC Jet Kit Version
$350.00
$189.97 -
Fox 3M/118'' RC Glider Electric Motor Version
$629.00
$399.97 -
Dynam Cessna 188 Crop Duster 59''/1500mm PNP Electric RC Plane Orange
$319.00
$177.99 -
Dynam T-28 Trojan 1270mm EPO RC Plane With Retracts Ready-To-Fly
$399.00
$319.97 -
Dynam WACO (YNF-5D) 1270mm 4ch EPO RC Electric Plane Ready-To-Fly
$399.00
$319.97 -
Volantex ASW28 2.6m/103'' Unibody Scale RC Glider (759-1) PNP
$289.00
$166.99 -
Volantex Ranger 2400 5 Channel FPV Airplane With 2.4 Meter Wingspan And Multiple Camera Mounting Platform (757-9) PNP
$369.00
$188.97 -
Dynam Devil 3D Sport Aerobatic Bi-Plane EPO Electric RC Plane Ready-To-Fly
$399.00
$319.97 -
Dynam A-10 Thunderbolt II V2 Twin 64mm EDF RC Jet with Retracts 1080mm Wingspan Ready-To-Fly
$429.00
$319.97 -
F3A 950mm Wingspan EPO RC Plane PNP Red
$199.00
$99.97
Product Description
Bonanza is based on the late 1940’s civilian aircraft the Beechcraft Bonanza.
With a low wing and a wingspan of only 950mm, this is a plane that you can take
anywhere. Durafly has designed it as an easy hand launcher.
It is built of superbly finished, tough EPO and comes with stickers already applied. All electrics are pre-installed, just fit your receiver and battery. For better control, Durafly has fitted ball links on all control surfaces. The Bonanza is ready to "Throw it and Show it"
The Bonanza has a big wing that makes it a stable flier, but has heaps of power and will easily do the major tricks, loops and rolls, with poise. After a successful flight, you can slow down and float in for a stress-free belly landing.
Features:
• Quick, easy assembly
• Superbly finished, highly compressed EPO construction
• Hand launch, belly landing
• 4 Channels (ailerons, elevator, rudder (V-Tail), throttle)
• Ball links for control surfaces
• Strong, fully molded plastic cowl and belly skid
• Full 4 channel control: Elevator, rudder, throttle and aileron
• V-Tail tailplane
• Aileron servo covers
Specs:
Wingspan: 950mm (37.4")
Length: 650mm (25.6")
Flying Weight: 540g (19.5oz) (inc all electronics and battery)
Servo: 9g x 4
ESC: 20A
Motor: 1300KV
Propeller: 7x5
Suggested battery: 3S 1300mAh
CG position: 70mm +/- 5mm
Control surface throws: ±8mm
Suggested Set-Up:
C of G: 90mm ± 5mm (measured from leading edge at root of wing)
Elevator: 8mm each way (+ 30% exponential)
Ailerons: 8mm each way (+ 25% exponential)
Rudder: 12mm each way (+ 25% exponential)
Required (not included):
Minimum 4ch Transmitter capable of V-Tail mixing
Appropriate 4ch receiver
1 x 1300mAh 3S LiPo battery
CA Glue
It is built of superbly finished, tough EPO and comes with stickers already applied. All electrics are pre-installed, just fit your receiver and battery. For better control, Durafly has fitted ball links on all control surfaces. The Bonanza is ready to "Throw it and Show it"
The Bonanza has a big wing that makes it a stable flier, but has heaps of power and will easily do the major tricks, loops and rolls, with poise. After a successful flight, you can slow down and float in for a stress-free belly landing.
Features:
• Quick, easy assembly
• Superbly finished, highly compressed EPO construction
• Hand launch, belly landing
• 4 Channels (ailerons, elevator, rudder (V-Tail), throttle)
• Ball links for control surfaces
• Strong, fully molded plastic cowl and belly skid
• Full 4 channel control: Elevator, rudder, throttle and aileron
• V-Tail tailplane
• Aileron servo covers
Specs:
Wingspan: 950mm (37.4")
Length: 650mm (25.6")
Flying Weight: 540g (19.5oz) (inc all electronics and battery)
Servo: 9g x 4
ESC: 20A
Motor: 1300KV
Propeller: 7x5
Suggested battery: 3S 1300mAh
CG position: 70mm +/- 5mm
Control surface throws: ±8mm
Suggested Set-Up:
C of G: 90mm ± 5mm (measured from leading edge at root of wing)
Elevator: 8mm each way (+ 30% exponential)
Ailerons: 8mm each way (+ 25% exponential)
Rudder: 12mm each way (+ 25% exponential)
Required (not included):
Minimum 4ch Transmitter capable of V-Tail mixing
Appropriate 4ch receiver
1 x 1300mAh 3S LiPo battery
CA Glue