Features:

High-wing aircraft with very smooth slow flight characteristics and amazing 3D aerobatic performance.

Large air-filled and shock-absorbing tires make short take-offs and landings possible on almost any surface.

Equipped with 6S LiPo compatible brushless motor and an 80A Hobbywing controller (with EC5 connector) and a 15×7” wooden propeller. Excellent climb performance and a very good top speed.

2:1 and large control surfaces on the wings, elevator and rudder make the model a 3D aerobatic trainer with excellent slow flight and STOL properties (short take-off and landing).

The wings utilise a thick aerofoil with very large flaps and ailerons (approx. 40% of the total area).

Highly visible SIBA design

The flaps can be switched to a control surface via the transmitter and are suitable for extreme 3D manoeuvres

Ailerons and landing flaps can be mixed: Ensures extreme maneuverability in flight


Various access hatches to all components on the fuselage and a large battery compartment for 6S LiPo batteries from 3000-4200mAh

2-piece wing with fibreglass tube wing joiner

5015 brushless motor 550KV

The ESC controller (Hobbywing 80A / 5V 8A UBEC) ensures good response in every situation and the precise

Digital servos with metal gears for optimal steering control.


Specifications:

Wingspan: 1830mm (72")
Length: 1330mm (51.2")
Wing loading: 68.5g/dm²
Wing area: 43.2dm²
Weight: approx. 6 lbs (2685g) ready to fly (depending on battery size)
Main material: EPO foam, high-strength
Thrust: over approx. 2:1
Motor: 5015 / 550kv
ESC Controller: 80A Hobbywing, 5V / 8A UBEC, XT90 plug
Propeller: 15 x 7 / 2-blade wooden
Servos: 2x 25g digital, 4x 19g digital
Construction time: approx. 30min

Required accessories (not included):
Transmitter and receiver at least six channels (recommended: at least 6-channel computer transmitter)
LiPo battery 3000 – 5200mAh 6S with XT90 connector
Charger for drive battery